Danaher Motion SuperDrive ACS24 Series, Руководство пользователя

Страница: 23 / 99

26.04.2005 Installation
Figure 10. Installing flat heatsink AC SuperDriv
3.7 W
IRING
This section provides schematic diagrams and related information for connecting AC
SuperDrives into a vehicle in a CAN Bus based application. These circuit diagrams present basic
- but functional - general purpose wiring configurations. AC SuperDrive users may choose to
modify these generic-wiring configurations to fit their individual requirements or conventions.
3.7.1 M
OTOR AND BATTERY CONNECTIONS
Figure 11 shows the basic power-wiring diagram for the AC SuperDrive and it’s motor. This
configuration utilizes an on-board fuse and main contactor under direct control of the truck
controller.
Table 2 provides a description of the six terminal post connections on the AC
SuperDrive.
Terminal Description
B+ Provides a tie point for connection of battery power to the on-board
fuse (no connection to internal AC SuperDrive circuitry from this
terminal).
+ Supplies fused battery power to the power stage that produces three-
phase AC motor current.
B- Battery return connection.
U, V, W Phase connections for the three-phase induction motor.
Table 2. Motor and Battery Connections.
i
Figure 11 is only a generic power schematic drawing. The actual
wiring of a vehicle may differ from the configuration in Figure 11 .
User's Guide 1.0 Item No.
89Y05120A
23