DAITEM SH101AX, Руководство по установке

Страница: 22 / 50

232
GB
4.5.4 Installation of an IR column (transmitter or receiver)
1. Assembly of the radio module
NOTE
• The IR transmitter module with radio is SH102AX or SH103AX, marked “TRANSMITTER”.
• The IR receiver module, with radio is SH102AX or SH103AX marked “RECEIVER”.
SH
102
A
X
A1
1
31
A0
57
89
C. Install the supplied cable gland and
its sealing ring.
Anti-tamper pin
End-of-line
terminator
block
Upper cable
break-out
Cable gland
with sealing ring
B. Open & clear the cable gland access
hole just above the anti-tamper pin. A. Remove the “End-of-line” terminator
from the upper most of terminal block
and to put it on side for later
installation in the top terminal block
of the highest slave IR module of the
column.
Take the radio module , of the column to be installed, identified by the labels located on the back case and on the IR module, then
remove the battery from its housing.