DAITEM SH101AX, Руководство по установке

Страница: 18 / 50

228
GB
4.4.2 Fixing to a pole
In the case of the installation of an infra-red module on a pole, first of all insert the plastic screw (provided) in the base anti-tamper pin.
3. With the blade of a screw driver mark 2 sets of drill guide
holes on the centre line of the base of module 1.
In the case of 2 modules mounted
on the same fixing pole
(see diagram), mark the 2 sets
of fixing holes as shown,
on the base of base module 2.
Opposite
marker holes
Module 1 Module 2
4. For each base unit, use a “U” clamp (provided) and one set
of the fixing holes in the middle of the base see step 3, and
one straight bar (provided) at the top & bottom of the base,
to provide rigid fixing.
1. Retain the anti-tamper pin and insert the plastic screw. 2. Tighten the screw in the anti-tamper pin.
Module 1 Module 2
Module 2 Module 1
Screws
M3×8
Use for “U”
collar attachment
Screws
M3×8 Use for “U”
collar attachment
Clamp holes,
Stage 3
Anti-tamper pin
Plastic screw