Daikin VRV IV RKXYQ5T8Y1B Series, Инструкция для установки и пользователя

Страница: 108 / 156

19 | Configuration
Installer and user reference guide
108
R R8T7V1B
VRV IV heat pump for indoor installation
4P499898-1A – 2020.10
PC configurator
You can also make field settings through a personal computer interface (for this,
option EKPCCAB* is required). The installer can prepare the configuration (off-site)
on PC and afterwards upload the configuration to the system.
See also: "To connect the PC configurator to the compressor unit" [
4
122].
Mode 1 and 2
Mode Description
Mode 1
(monitoring settings)
Mode 1 can be used to monitor the current situation of
the compressor unit. Some field setting contents can be
monitored as well.
Mode 2
(field settings)
Mode 2 is used to change the field settings of the
system. Consulting the current field setting value and
changing the current field setting value is possible.
In general, normal operation can be resumed without
special intervention after changing field settings.
Some field settings are used for special operation (e.g., 1
time operation, recovery/vacuuming setting, manual
adding refrigerant setting, etc.). In such a case, it is
required to abort the special operation before normal
operation can restart. It will be indicated in below
explanations.
19.2.2 To access the field setting components
See "To open the compressor unit" [
4
66].
19.2.3 Field setting components
The components to make field settings differ depending on the model.
Model Field setting components
5 HP ▪ Push buttons (BS1~BS5)
▪ 7‑LEDs display (H1P~H7P)
▪ H8P: LED for indication during initialisation
▪ DIP switches (DS1)
8 HP ▪ Push buttons (BS1~BS3)
▪ 7‑segments display ( )
▪ DIP switches (DS1 and DS2)