Daikin REYQ96MTJU, Инструкция по проектированию, установке и испытаниям, Страница: 18 / 236

Points to Bear in Mind at the System Design Si39-406
12 General Information
Step 2:
Preparation of the
Control Circuit
Diagrams The following sequence should be followed in order to prepare control circuit diagrams in
accordance with the system list which has already been completed:
Diagrams should be prepared for each individual outdoor unit. The outdoor unit model number
should be inserted into the diagram. (REYQ96M)
Insert name of refrigerant system. (PAC1, PAC2)
Insert name of indoor unit. (FXFQ12M
→
FQ12M)
Insert system name of indoor unit.
Insert installation position. (Do this when demarcation is possible)
Insert remote controller control wiring. (Group) Indicated by solid line. ........Solid line.
Insert centralized control wiring. ........Dotted line
Insert Group No. (G No. for each indoor unit with U No. 0)
The control circuit diagrams are now complete.
Example: Control circuit diagram