8
Read First
English
Odour sensor lamp
Indicates the intensity of odours in 3 colours:
blue, orange, red.
• Blue indicates that the air is clean.
Lamp colour
Odours
Blue
Orange
Red
Low
High
If operation is started immediately after the power
supply plug is inserted, the lamp will light blue for
about the fi rst minute.
If odour intensity levels are unchanging, the sensor may
not respond even if there is a strong odour in the air.
The following types of odours may not be detected:
pet odours that do not include ammonia, garlic odours,
etc.
As odour perception varies by person, in some cases an
odour may be sensed even when the lamp is blue.
If the odour bothers you, select a high airfl ow rate setting.
►
Page 16
The basic sensitivity of the odour sensor will be
determined by odour levels in about the fi rst minute after
the power supply plug is inserted every time. Insert the
power supply plug when the air is clean (odour-free).
Odour sensor detection range
Detectable matter
tobacco odours, cooking odours, pet odours, toilet smells,
waste smells, mould odour, sprays, alcohol
Sometimes detectable
sudden changes in temperature/humidity, steam, oil
smoke, gas emitted from combustion-based heating
devices
Water supply lamp [red]
• When water in the water tank is depleted during humidifying operation a tone (3 long beeps) will sound, the lamp will light
up, and
humidifying operation
will stop.
(Air purifying operation will continue with the HUM lamp lit up.)
• After lighting up, the water supply lamp may be on and off a few times, however, this is normal (not a malfunction).
• Stop operation, unplug the power supply plug, and then fi ll the water tank with water.
►
Page 12
• To stop the notifi cation tone (3 long beeps) from sounding, change the setting.
►
Page 24
Streamer lamp [blue]
Lights up when the streamer is
active.
Indicates that it is time to clean the
streamer unit by blinking.
►
Page 27, 28, 32
