18
Operation
English
MODE
Usage and Function
AUTO FAN
Automatic airfl ow rate adjustment
FAN setting (Quiet, Low, Standard, High*) is automatically adjusted according to the degree of air
impurity and humidity (when the Humidifying operation is active).
Purifying capacity increases as airfl ow rate rises.
* The maximum airfl ow rate during AUTO FAN MODE is “High”, which is less powerful than “Turbo”.
• Press
to select the humidity level.
• Degree of air impurity corresponds to the volume of dust and the intensity of odours in the ambient air.
ECONO
Saving energy
In Power saving mode within ECONO MODE, the FAN setting automatically switches between Quiet
and Low only. Power consumption (*1) and operating sounds are reduced.
If the air is clean and the set humidity level has been achieved (when the Humidifying operation is
active), after a short while, Monitoring mode automatically activates.
Recommended for use during sleep hours.
*1 By comparison to AUTO FAN MODE (about 12.6Wh), power consumption in ECONO MODE (about
6.7Wh) is about 5.9Wh lower.
Test conditions: operation in 10m² area over 1 hour. Assuming 1 cigarette was smoked immediately after
the unit was turned on.
Power saving mode
FAN setting switches
automatically between
Quiet and Low.
If the air is clean and the set
humidity level has been
achieved, after a short while...
Monitoring mode
•
The fan starts and stops periodically.
Dust, odours, and the humidity level are
monitored.
• The following functions are turned off, further
reducing power consumption.
Streamer
OFF
OFF
Humidifying
Active plasma ion
OFF
If the humidity level falls, or
dust or odours are
detected...
*2 The humidifi er ON/OFF lamp remains lit up.
(*2)
• As the FAN setting is limited to Quiet and Low, air purifying and humidifying capacity is reduced.
• As air is not drawn in when the fan has stopped, the dust/PM2.5 sensor, odour sensor, and humidity
sensor reduce in sensitivity. To prevent this reduction in sensitivity, turn Monitoring mode OFF.
►
Page 25
• FAN setting is adjusted automatically. Airfl ow cannot be adjusted manually.
• Press
to select the humidity level.
ANTI-
POLLEN
Reducing pollen levels
A gentle air current is created by switching every 5 minutes between the FAN setting Standard and
Low so that pollen can be drawn in and caught before it reaches the fl oor.
• Press
to select the humidity level.
