20
Operation
English
Operating in GOOD SLEEP MODE
If using together with humidifying operation, fi ll the water tank with water.
►
Page 12
Attention
• Be sure to attach the humidifying fi lter unit before operating.
• Change the water in the humidifying tray and water tank everyday.
• Be sure to use tap water for the water in the water tank.
• As leaving any residual water in the humidifying tray will lead to bad odours and dirt build-up, be sure to discard any
residual water in the humidifying tray each time the water tank is refi lled.
1.
Press
.
• The GOOD SLEEP MODE lamp (green) lights up.
• The humidity can be changed with
.
• When you want to cancel, press
,
, or
, then change the airfl ow rate/mode.
About GOOD SLEEP MODE
Operation is performed with a reduced airfl ow rate and indicator lamp brightness, which makes this mode
suitable for when you are sleeping or taking a nap, etc.
• The airfl ow rate is adjusted automatically between 3 levels, “ (Quiet)”, “ (Low)” and “
(Standard)”.
• The indicator lamp brightness is set to “OFF”.
• Streamer discharge stops. (Quietness is prioritized. Deodorising performance is reduced.)
• If the water tank becomes empty, the water supply lamp lights up, but a tone does not sound.
• If
is pressed during operation in GOOD SLEEP MODE, the brightness of the indicator lamps cycles
between “DIM” and “OFF”.
• After 8 hours pass, the unit will return to the operation mode that it was in before GOOD SLEEP MODE.
• Pressing
during operation will cause operation to stop.
Note
• Indoor temperature may fall when the Humidifying operation is running.
• Gurgling or splashing sounds may be generated when the Humidifying operation is running, however, this is normal (not a
malfunction).
►
Page 36
• If the set humidity is reached or the water supply lamp lights up during humidifying operation, humidifying operation will stop, but
air purifying operation will continue.
