14
Read First
English
7.
Attach the deodorising fi lter.
• Attach the deodorising fi lter by fi rst inserting the
bottom part into the deodorising fi lter holders (2 places
on the left/right).
(The deodorising fi lter has no special orientation, so
installing it upside-down or backwards does not
matter.)
• When secured under the protrusions of the front safety
guard, the deodorising fi lter may appear to be
damaged, but the performance will not be affected.
If the deodorising fi lter is
not attached properly, the
notifi cation tone is
emitted and the odour
sensor lamp blinks at
operation start. Re-attach
properly.
Deodorising fi lter holder
component
Securely push and insert
the deodorising fi lter
Deodorising fi lter
Deodorising
fi lter holder
Deodorising
fi lter holder
Attach so
that the tag
is visible
Attach fully behind the
deodorising fi lter holders
Push the fi lter against
the protrusions and
pierce to secure
8.
Attach the dust collection fi lter.
• Please check that the deodorising fi lter is attached.
• Attach the dust collection fi lter by fi rst inserting the
bottom part fully behind the protrusions.
Dust collection fi lter
The dust collection fi lter has a special
orientation.
Check the symbol on the upper part of the
fi lter before attaching.
Deodorising fi lter
Protrusion
9.
Attach the pre-fi lter.
• While fl exing the pre-fi lter, insert the hooks (4 places
on the left/right) into the holes in the unit (4 places on
the left/right). (The pre-fi lter has no top-bottom
orientation.)
Pre-fi lter
Holes
(4 places
left/right)
Hooks
Hooks
(4 places
left/right)
10.
Attach the front panel.
• Hook the hooks at the top of the panel into the groove
in the upper part of the unit (2 places), then close the
panel.
Groove in the upper part of the unit
(2 places left/right)
Hooks (2 places on
the left/right)
2 Press until a catching
sound is heard
(2 places left/right)
1 Hook
Attention
Be sure to operate with a pre-fi lter, dust collection fi lter, and
deodorising fi lter attached.
If the unit is operated without the fi lters attached, malfunction
may result.
6
Inserting the power supply plug into the
socket
Power supply plug
Power socket
• The basic sensitivity of the odour sensor will be
determined by odour levels in about the fi rst minute
after the power supply plug is inserted every time.
Insert the power supply plug when the air is clean
(odour-free).
