22
Advanced Settings
English
FAN lamp (Standard)
FAN lamp (Quiet)
MODE ANTI-POLLEN lamp
Note
Settings are remembered even if the unit is unplugged.
Streamer Output Settings
If the hissing sound generated by the streamer discharge or the odour of ozone bothers
you
Streamer output can be set to “Low”. (Settings at time of purchase: Normal)
It is recommended that the streamer be set to “Normal” as deodorising capacity is reduced when set to “Low”.
1.
Hold down
for about 5 seconds and when a short beep sounds, press
while pressing
.
(Setting can be performed either during operation or while operation is stopped.)
2.
When a short beep sounds, release
and
.
• The MODE ANTI-POLLEN lamp blinks for about 5 seconds and then
lights up.
• One of the FAN lamps “ (Quiet)/ (Standard)” will blink for about
5 seconds and then the lamp corresponding to the current setting will
light up.
Current
setting
FAN lamp
(Quiet)
FAN lamp
(Standard)
Normal
OFF
Lit up
Low
Lit up
OFF
3.
Press
to change the output settings.
• Each press cycles between “Normal” and “Low” streamer output.
(The MODE ANTI-POLLEN lamp will remain lit up.)
• If the lamp does not change, unplug the unit, wait at least 5 seconds,
then re-insert the power supply plug and repeat the above procedure
from the beginning.
If the streamer output is set to “Low”
Setting
Streamer
FAN
Quiet, Low
OFF
Standard, Turbo
ON
MODE
AUTO FAN, ANTI-
POLLEN, MOIST,
CIRCULATOR
Depends on airfl ow
rate
ECONO
OFF
4.
Press
after selecting the new setting.
• A short beep sounds and the MODE ANTI-POLLEN lamp will blink.
• The FAN lamp “ (Quiet)/ (Standard)” blinks depending on the
setting.
Output setting
FAN lamp
(Quiet)
FAN lamp
(Standard)
Normal
OFF
Blinking
Low
Blinking
OFF
5.
While the lamp is blinking, unplug the power supply plug, wait at least 5 seconds, and then insert the
power supply plug again. Setting is now complete.
• If this procedure is not performed, the unit will not return to regular operation mode.
Operating panel
