SiUS042113E
Main Functions
Part 4 Functions and Control
51
Note(s)
1.17 CLEAN Operation
Outline
The CLEAN function dries the interior of the indoor unit to reduce the amount of condensation
present. When COOL or DRY operation is performed, condensation may occur inside the air
conditioner. It is recommended to dry the inside of the air conditioner using CLEAN operation.
Details
To operate automatically
1. Press and hold
Menu (push 2sec)
button for 2 seconds.
2. Press
Select
▲ or
Select
▼ button to select menu number
2
.
Mold proof icon appears and
2
blinks.
3. Press
Menu (push 2sec)
button to confirm the select setting.
4. Press
Select
▲ or
Select
▼ button to change the setting as follows:
R4003797
5. Press
Menu (push 2sec)
button again.
Automatic CLEAN operation will be enabled or disabled according to the chosen setting.
If automatic CLEAN operation is enabled, CLEAN icon appears on the LCD and the CLEAN
PROOF lamp lights green when CLEAN operation is in progress.
R4003798
6. Press
Cancel
to return to the default screen.
Note on CLEAN setting
The display automatically returns to the default screen after 60 seconds. To return to the default
screen sooner, press
Cancel
button twice.
Notes on CLEAN operation
When you want to stop CLEAN operation midway, press
ON/OFF
button twice.
After DRY or COOL operation stops, the air conditioner starts CLEAN operation automatically,
and then stops automatically 140 minutes later.
This operation dries the inside of the air conditioner using FAN operation and HEAT operation.
The indoor temperature and humidity may not suit your preferences.
The CLEAN function dries the interior of the indoor unit to reduce the amount of condensation
present.
CLEAN operation is not available when the unit is turned off using the OFF TIMER or turned off
using a smartphone.
The flaps may sometimes close to increase the drying effect inside the air conditioner.
CLEAN operation automatically dries the inside of the air conditioner each time after COOL and
DRY operation is stopped.
CLEAN operation may not be performed if the COOL or DRY operation time is short.
If CLEAN operation does not suit your preference, set operation to “OFF”.
Automatic operation is disabled
(default)
Automatic operation is enabled
Display
Содержание FTXM-V Series
