Daikin Altherma EHFH03S18D 3V Series, Руководство по установке для специалистов

Страница: 51 / 216

6 | Application guidelines
Installer reference guide
51
E EHFH03S18D
Daikin Altherma 3 R F
4P596806-1C – 2022.09
Power meter types
Single-phase power meter.
6.6 Setting up the power consumption control
You can use the following power consumption controls. For more information
about the corresponding settings, see
"10.4 Advanced configuration/
optimisation" [
4
136].
# Power consumption control
1 "6.6.1 Permanent power limitation" [ 4 51]
▪ Allows you to limit the power consumption of the entire heat pump
system (sum of indoor unit and backup heater) with one permanent
setting.
▪ Limitation of power in kW or current in A.
2 "6.6.2 Power limitation activated by digital inputs" [ 4 52]
▪ Allows you to limit the power consumption of the entire heat pump
system (sum of indoor unit and backup heater) via 4 digital inputs.
▪ Limitation of power in kW or current in A.
NOTICE
Set a minimum power consumption of ±3.6 kW to guarantee:
▪
Defrost operation. Otherwise, if defrosting is interrupted several times, the heat
exchanger will freeze up.
▪
Space heating and DHW production by allowing the backup heater step 1.
▪
Disinfection operation.
6.6.1 Permanent power limitation
Permanent power limitation is useful to assure a maximum power or current input
of the system. In some countries, legislation limits the maximum power
consumption for space heating and DHW production.
P
i
t
DI
a
b
P
i
Power input
t Time
DI Digital input (power limitation level)
a Power limitation active
b Actual power input
Setup and configuration
▪ No additional equipment needed.