background image

6

 | 

Application guidelines

Installer reference guide

49

ERLA11~W1 + EBVH16SU23DJ
Daikin Altherma 3 R F
4P655196-1 – 2021.09

Benefits

Comfort.

-

The smart room thermostat functionality can decrease or increase the desired
leaving  water  temperature  based  on  the  actual  room  temperature
(modulation).

-

The  combination  of  the  two  heat  emitter  systems  provides  the  excellent
heating comfort of the underfloor heating, and the excellent cooling comfort of
the heat pump convectors.

Efficiency.

-

Depending  on  the  demand,  the  indoor  unit  supplies  different  leaving  water
temperature matching the design temperature of the different heat emitters.

-

Underfloor heating has the best performance with the heat pump system.

6.3 Setting up an auxiliary heat source for space heating

INFORMATION

Bivalent is only possible in case of 1 leaving water temperature zone with:

room thermostat control, OR

external room thermostat control.

Space heating can be done by:

-

The indoor unit

-

An auxiliary boiler (field supply) connected to the system

When  there  is  a  heating  request,  the  indoor  unit  or  the  auxiliary  boiler  starts
operating. Which of these units operates, depends on the outdoor temperature
(status of the changeover to external heat source). When the permission is given
to the auxiliary boiler, the space heating by the indoor unit is turned OFF.

Bivalent operation is only possible for space heating, NOT for domestic hot water
production. Domestic hot water is always produced by the DHW tank connected
to the indoor unit.

INFORMATION

During heating operation of the heat pump, the heat pump operates to achieve
the  desired  temperature  set  via  the  user  interface.  When  weather-dependent
operation  is  active,  the  water  temperature  is  determined  automatically
depending on the outdoor temperature.

During  heating  operation  of  the  auxiliary  boiler,  the  auxiliary  boiler  operates  to
achieve the desired water temperature set via the auxiliary boiler controller.

Содержание Altherma 3 R F

























































































































































































































































































































Отзывы: