Daikin Altherma 3 GEO, Руководство по установке для специалистов

Страница: 245 / 252

8/11
Breadcrumb Field code Setting name Range, step
Default value
Date Value
Field settings table Installer setting at variance with
default value
9.I [2-0C] R/W 0: Underfloor heating
1: Fancoil unit
2: Radiator
9.I [2-0D] R/W 0: Underfloor heating
1: Fancoil unit
2: Radiator
9.I [2-0E] R/W 20~50 A, step: 1 A
50 A
9.I [3-00] R/W 0: No
1: Yes
9.I [3-01] 0
9.I [3-02] 1
9.I [3-03] 4
9.I [3-04] 2
9.I [3-05] 1
9.I [3-06] R/W 18~30°C, step: 0,5°C
30°C
9.I [3-07] R/W 12~18°C, step: 0,5°C
12°C
9.I [3-08] R/W 25~35°C, step: 0,5°C
35°C
9.I [3-09] R/W 15~25°C, step: 0,5°C
15°C
9.I [4-00] R/W 0: Disabled
1: Enabled
2: Only DHW
9.I [4-01] R/W
0: None
1: BSH
2: BUH
9.I [4-02] R/W 14~35°C, step: 1°C
16°C
9.I [4-03] 3
9.I [4-04] R/O 0: Intermittent
1: continuous
2: Disabled
9.I [4-05]
0
9.I [4-06] R/W 0: Manual
1: Automatic (normal SH/ DHW ON)
2: Auto red SH/ DHW ON
3: Auto red SH/ DHW OFF
4: Auto normal SH/ DHW OFF
9.I [4-07] R/W [5-0D]=2: 0~9 kW, step: 1 kW
9 kW
[5-0D]
≠
2: 0~6 kW, step: 1 kW
6 kW
9.I [4-08] R/W
0: No limitation
1: Continuous
2: Digital inputs
3: Current sensors
9.I [4-09] R/W 0: Current
1: Power
9.I [4-0A] 1
9.I [4-0B] R/W 1~10°C, step: 0,5°C
1°C
9.I [4-0D] R/W 1~10°C, step: 0,5°C
3°C
9.I [4-0E] R/W -6~6 A, step: 0,5 A
0 A
9.I [5-00] R/W 0: Allowed
1: Not allowed
9.I [5-01] R/W -15~35°C, step: 1°C
0°C
9.I [5-02] R/W 0: Disabled
1: Enabled
9.I [5-03] R/W -15~35°C, step: 1°C
0°C
9.I [5-04]
10
9.I [5-05] R/W 0~50 A, step: 1 A
16 A
9.I [5-06] R/W 0~50 A, step: 1 A
16 A
9.I [5-07] R/W 0~50 A, step: 1 A
16 A
9.I [5-08] R/W 0~50 A, step: 1 A
16 A
9.I [5-09] R/W 0~20 kW, step: 0,5 kW
5 kW
9.I [5-0A] R/W 0~20 kW, step: 0,5 kW
5 kW
9.I [5-0B] R/W 0~20 kW, step: 0,5 kW
5 kW
9.I [5-0C] R/W 0~20 kW, step: 0,5 kW
5 kW
9.I [5-0D] R/W 0: 230V, 1~
2: 400V, 3~
9.I [5-0E]
1
9.I [6-00] R/W
2~20°C, step: 1°C
6°C
9.I [6-01] R/W 0~10°C, step: 1°C
2°C
9.I [6-02] 0
9.I [6-03] 3
9.I [6-04] 6
9.I [6-05] 0
9.I [6-06]
0
9.I [6-07]
0
9.I [6-08] R/W
2~20°C, step: 1°C
10°C
9.I [6-09] 0
9.I [6-0A] R/W 30~[6-0E]°C, step: 1°C
60°C
9.I [6-0B] R/W 30~min(50, [6-0E])°C, step: 1°C
45°C
What is the desired comfort storage temperature?
What is the desired eco storage temperature?
--
--
--
--
--
--
What is the hysteresis to be used in reheat mode?
What is the requested limit for DI4?
What is the requested limit for DI1?
What is the requested limit for DI2?
What is the requested limit for DI3?
What is the requested limit for DI4?
--
Backup heater voltage
--
The temperature difference determining the heat pump ON temperature.
The temperature difference determining the heat pump OFF temperature.
Space heating priority.
Space heating priority temperature.
--
What is the requested limit for DI1?
What is the requested limit for DI2?
What is the requested limit for DI3?
Which power limitation type is required?
--
Automatic cooling/heating changeover hysteresis.
Automatic cooling/heating changeover offset.
Is backup heater operation allowed above equilibrium temperature during space
heating operation?
What is the equilibrium temperature for the building?
Current sensor offset
Below which outdoor temperature is heating allowed?
--
Water pipe freeze prevention
--
Emergency setting
Which power limitation mode is required on the system?
Maximum BUH capacity
What is the maximum desired room temperature in heating?
What is the mimimum desired room temperature in heating?
What is the maximum desired room temperature in cooling?
What is the minimum desired room temperature in cooling?
What is the BUH operation mode?
Which electric heater has priority?
Is auto restart of the unit allowed?
--
--
--
--
--
What emitter type is connected to the main LWT zone?
What emitter type is connected to the additional LWT zone?
What is the maximum allowed current over the heatpump ?
4P569818-1A - 2019.10 (#) Setting is not applicable for this unit. (*1) *X*_(*2) *H*