Daihen OTC ARXIS pulse P403L, Руководство пользователя

Страница: 38 / 188

C
ONNECTING THE
W
ELDING
P
OWER
S
OURCE
C
ONNECTION
C
HAPTER
4
36
4.2.3 Connection of welding torch
This section explains the procedure for connecting the welding torch.
T I P S
•
When the air-cooled welding torch (with voltage detection) is used, refer to "4.2.5
-
Connection of
voltage detection cable (In using voltage detection cable)".
1.
Connect the torch cable to the wire feeder.
● Fit the form of the connector with that of the terminal, for secure connection and tighten the knurled screws in
the clockwise direction.
2.
When using the water-cooled welding torch, connect the water feeding hose and condensing hose of the
welding torch to the wire feeder.
●
Fully insert the hose end to the connection port of wire feeder.
For disconnection, hold the hose end, and press the collar part to the arrow mark direction shown in the figure.
Connection for welding torch is complete. Procedure is followed by "4.2.4
-
Connection of analog remote control (optional)
(In using analog remote control)".
Welding torch
When air-cooled
welding torch is used
When water-cooled
welding torch is used
Feeding water port
（ blue ）
Condensing water port
（
red
）
Feeding water hose
㸦 blue 㸧
Condensing water hose
㸦 red 㸧
Wire feeder