Daihen OTC ARXIS pulse P403L, Руководство пользователя

Страница: 113 / 188

S
ETTING
I
NTERNAL
F
UNCTIONS
W
ELDING
C
ONDITION
C
HAPTER
6
111
Chapter 6 W
elding Condition
6.7.2.19 F23: Sleep mode switching time
When the welding power source is not operated for a fixed period of time, it can be turned into the sleep mode.
• [0]: disables the function.
• [1] to [10]: enables the function.
Set the transition time to the sleep mode in the range of 1 to 10. During the sleep mode, power consumption is reduced.
– In the sleep mode, the items displayed in the touch panel are turned OFF.
– Select any key or touch the touch panel to return to normal mode.
6.7.2.20 F24: Wire feeding speed setting
The welding current can be automatically set based on the wire feed speed.
• [ON]: enables the function.
– The welding power source is automatically set based on the wire feed speed.
– Even when the welding mode is changed by the GAS menu, the welding current is automatically set
based on the set wire feed speed.
– Set the feed speed in the unit of 0.1 m/min. by the HOME screen.
– Switching to the welding current display can check the welding current value automatically set.
– In using the welding power source in the automatic machine mode, refer to the following diagram for
the relationship of command voltage and the wire feed speed (when the internal function F4 (Auto/
Semi-auto mode) is used with the setting of Automatic machine 1 mode).
T I P S
• The wire feed speed with the maximum command voltage is 22 m/min. (Depending
on the welding mode, the wire feed speed does not always reach 22 m/min.))
• The minimum wire feed speed is approximately 0.6 to 2.0 m/min. (This depends on
the welding mode.) Even when a low command voltage is input, it is not possible to
set to a value below this.
0
5
10
15
20
25
0 5 10 15
External command voltage (V)
<Command voltage - Welding current characteristic>
14 V
10 V
15 V
Wire feeding speed (m/min.)