Daihen OTC ARXIS pulse P403L, Руководство пользователя

Страница: 135 / 188

P
ROTECTION OF
W
ELDING
JOB
A
DMINISTRATOR
F
UNCTIONS
C
HAPTER
7
133
Chapter 7 Administrator F
unctions
5.
Register the welding condition as a favorite or activate condition.
●
Welding conditions registered as a favorite condition are marked with a star mark.
To register as a favorite: Move the scrollbar to the right.
To remove from favorites: Move the scrollbar to the left.
●
Welding conditions not registered as an activate condition are marked with a deactivate mark.
To register as a deactivate condition: Move the scrollbar to the right.
To register as an activate condition: Move the scrollbar to the left.
6.
Select BACK.

Registration completes and the screen returns to the previous one.
7.2 Protection of Welding JOB
This section explains the protection function (password function) of welding JOB. When the function is enabled, ( 5.5.2
-
Preventing erroneous operation on operation panel), a password will be requested to disable the erroneous operation
prevention function.
NOTE
•
Write down the password on a piece of paper and store it safely.
•
The current password will be requested also when you change it.
•
If a password is set and the erroneous operation prevention function is enabled, the
erroneous operation prevention function will not be disabled even if the power is turned off
and on or if the welding JOB and internal functions are initialized.
•
If the password is lost, please contact your dealer.