![Daher TBM 900 Скачать руководство пользователя страница 886](http://html.mh-extra.com/html/daher/tbm-900/tbm-900_pilots-information-manual_499727886.webp)
Pilot's Operating Handbook
Supplement 62
Flight envelope protection
Edition 0 - April 15, 2016
Rev. 3
Page 9.62.14
7.14 - Miscellaneous equipment
Stall warning system
The stall warning system consists of :
-
an electrically deiced lift transducer, installed in the leading edge of the right
wing,
-
an AoA computer,
>> From S/N 1000 to S/N 1105, plus S/N 687
-
the AOA TEST pushbutton located at the bottom of the L.H. side instrument
panel.
>> From S/N 1106
-
AOA TEST function is integrated in the TEST push-button on cockpit overhead
panel.
>> All
The system is also interfaced with the GARMIN flight deck.
The lift transducer is fitted with a vane that senses the change in airflow over the wing.
The AoA computer computes the normalized angle of attack of the airplane thanks to
the lift transducer information and the flaps position. The normalized angle of attack
value is sent to the GARMIN flight deck for display. The AoA computer also triggers the
stall aural warning alert that begins no later than 5 knots above the stall in all
configurations.
>> From S/N 1000 to S/N 1105, plus S/N 687
The stall warning system should be ckecked during the preflight inspection by
momentarily turning on the SOURCE selector and by manipulating the vane of the lift
transducer at the wing leading edge then, while in the cockpit by depressing the AOA
TEST pushbutton.
>> From S/N 1106
The stall warning system should be ckecked during the preflight inspection by
momentarily turning on the SOURCE selector and by manipulating the vane of the lift
transducer at the wing leading edge then, while in the cockpit by depressing the TEST
pushbutton on cockpit overhead panel.
PIM - DO NOT USE FOR FLIGHT OPERATIONS