Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 0 - October 31, 2013
Rev. 4
Page 3.9.2
ESI-2000 failures
2/2
►
Continuing
If in visual meteorological conditions :
2 -
Cycle power on ESI-2000, including internal power.
3 -
Maintain straight and level while unit aligns.
If red ”X” reappears :
4 -
Remain clear of IMC.
End of procedure
■
Amber X’d battery symbol displayed in flight :
Indicates internal battery is not available. Battery temperature above 55°C.
1 -
Reduce temperature of cockpit environment.
2 -
Remain clear of IMC until amber ”X” is removed from the display.
End of procedure
■
Amber battery symbol displayed in flight :
Indicates the internal battery state of charge is low.
1 -
Remain clear of IMC until amber battery symbol is removed from the
display signifying battery is charged sufficiently to have one hour of
discharge abilitiy.
End of procedure
■
ESI-2000 in-flight shutdown (manual procedure) :
1 -
Maintain control of the airplane using airplane primary instruments.
2 -
STBY INSTR breaker
Pull
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To remove all airplane power to the ESI-2000
3 -
Press any key (button) as stated by the on screen message.
4 -
M (Menu) button
Press repeatedly
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Until Shutdown menu is shown
5 -
+ (Hold) button
Press and hold
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Until SHUTTING DN message is shown
in the upper left corner of the screen
End of procedure.
PIM - DO NOT USE FOR FLIGHT OPERATIONS
