Pilot's Operating Handbook
Section 8
Handling, servicing and maintenance
Edition 0 - October 31, 2013
Rev. 4
Page 8.7.13
6 -
Coil oxygen tubing inside facepiece over reservoir bag.
7 -
Connect oxygen tubing to manifold oxygen fitting.
▲
WARNING
▲
Make sure lanyard pin is inserted into correct check valve for
mask being installed. Cross connected pins will result in
passengers pulling lanyard cords only to initiate oxygen flow to
another mask.
▲
8 -
Insert lanyard pin into corresponding check valve.
9 -
Place mask facepiece - first in deployment container. Make sure that oxygen
tubing and lanyard cord are free to deploy and are not caught between the
container and lid.
10 -
Close and latch deployment container lid.
PIM - DO NOT USE FOR FLIGHT OPERATIONS