Pilot's Operating Handbook
Supplement 60
ADS-B OUT function
Edition 1 - March 15, 2015
Rev. 3
Page 9.60.3
SECTION 4
Normal procedures
Operation of ADS-B OUT function does not change the normal procedures of the
airplane described in section 4 Normal procedures of the basic POH.
SECTION 5
Performance
Operation of ADS-B OUT function does not change the basic performance of the
airplane described in section 5 Performance of the basic POH.
SECTION 6
Weight and balance
Operation of ADS-B OUT function does not change the basic weight and balance of
the airplane described in section 6 Weight and balance of the basic POH.
SECTION 7
Description
Information hereafter supplement or replace those of the standard airplane described
in section 7 Description of the basic POH when the airplane is equipped with the
ADS-B OUT function.
The ADS-B OUT function enables the airplane to broadcast data, such as position
information, to ground stations and to other airplanes equipped with ADS-B IN
system.
The loss of an interfaced input to the selected extended quitter transponder may
cause the transponder to stop transmitting ADS-B OUT data. Depending on the
nature of the fault or failure, the transponder may no longer be transmitting all of the
required data in the ADS-B OUT messages.
>> Airplane equipped with one extended squitter transponder
ADS-B OUT data is only transmitted via transponder 1. Use of transponder 2 results in
a loss of the ADS-B OUT data transmission.
If the transponder 1 detects any internal fault or failure with the ADS-B OUT
functionality, XPDR1 ADS-B FAIL message will be displayed.
PIM - DO NOT USE FOR FLIGHT OPERATIONS
