Daedong CK22, Руководство по ремонту

Страница: 12 / 372

CK22/CK22H
6 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
2.7 USE OF APPROPRIATE TOOLS
AND EQUIPMENT
• Use the appropriate tools in proper size. If an inap-
propriate tool is used, it can be slipped which can
damage parts or injure you.
• Do not confuse units (mm, inch, etc.).
• Use the air impact wrench only when unscrewing
the bolts or nuts. Such wrench should never be used
when assembly precisely machined parts which its
tightening torque should be strictly observed. Over-
tightening can cause malfunction.
• Be careful of a socket popped out due to the turning
force when using the air impact wrench. Especially,
be extra cautious when working on connection or
socket with joint.
• When lifting the tractor with a hydraulic jack or a
hoist, fix it firmly and install the auxiliary support.
Never work under the tractor if the support and the
hydraulic jack (hoist) are not installed.
• When using a hydraulic jack or a hoist, do not use it
over the limit of the equipment and the lift strap.
• Make sure that the hydraulic lock operates properly
before using the hydraulic jack. Improper use of lock
can cause a serious accident.
• Check the buttons and operating direction of the
hoist before using it. Improper operation may cause
a serious accident.
• Do not use wooden blocks or bricks as support un-
der the tractor. As the tractor’s weight is continu-
ously applied to them, they can be broken or
collapsed.
2.8 HANDLING OF HAZARDOUS MA-
TERIALS
• Do not use pressurized air to blow out hazardous
materials, such as clutch dust, with compressed
air. Inhaling such hazardous materials can dam-
age your health.
NOTE:
• Genuine DAEDONG parts contain no asbetos.
• These materials should be rinsed or wiped away
after spraying oil.
T46W022A
2.6 CAUTIONS FOR HIGH PRESSURE
HOSES
• Hydraulic fluid leaking from high pressure hoses
or pipes can penetrate your skin.
• Before connecting a high pressure hose or pipe,
stop the engine and depressurize it by venting the
valve.
• Check the bolts for tightness before starting the en-
gine after servicing the hydraulic system.
• Use a cardboard or plank when checking for
leakage.
• Never weld the high pressure pipe or the surround-
ing area. The pipe or hose can be heated and ex-
plode which can lead to fire or burn.
T46W019A
T46W020A
T46W021A
SAFETY FIRST - SAFETY TIPS