Daedong CK22, Руководство по ремонту

Страница: 239 / 372

8-9 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
A. ADJUSTING
1. Loosen the lock nuts (1).
2. Turn the tie-rod (2) to factory specification.
3. Tighten the lock nuts (1).
(1) Lock nut (2) Tie-rod
4. MEASURMENT AND ADJUSTING
196W706A
196W707A
4.1 TOE-IN
1. Apply air pressure as specified to tires.
2. Measure the front width (A) and the rear width (b)
between the front wheels while straightened to ob-
tain the difference (toe-in).
3. For other than specified, loosen the tightening nut
on the ball joint for adjustment while turning the
screw on the ball joint. Be sure to make the expo-
sure of left and right rods in the steering cylinder
equal this time.
(A) Front width (B) Rear width
Item
Toe-in (B-A)
Factory spec.
2 ~ 8 mm
0.08 ~ 0.31 in.
4.2 ROCKING FORCE OF FRONT
AXLE
1. Jack up the front side of tractor and remove the front
wheel.
2. Set a spring balance to the front gear case cover.
3. Measure the front axle rocking force.
4 . I f t h e m e a s u r e m e n t i s n o t w i t h i n t h e f a c t o r y
specifications, adjust with the adjusting screw (1).
5. Tighten the lock nut (2) firmly.
(1) Adjusting screw (2) Lock nut
196W708A
Item
Front axle rocking force
Factory spec.
49.0 ~ 117.7 N
5.0 ~ 12.0 kgf
11.0 ~ 26.5 lbs
FRONT AXLE - MEASURMENT AND ADJUSTING