Daedong CK22, Руководство по ремонту

Страница: 309 / 372

10-29 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
4.1.4 FLOW DIVIDER ASSEMBLY
1. Separate the flow divider assembly(2).
(When reassembling)
• Install the flow divider assembly (2) to the outlet,
using care not to damage the O-ring.
4.1.5 DIRECTIONAL VALVE
1. Remove the external snap ring (2).
2. Remove the directional valve (3)
(When reassembling)
• Install the O-ring to the directional valve, taking care
not to damage the O-ring.
Apply grease to them before installation.
(1) Straight pin (3) Directional valve
(2) Snap ring
(1) Relief valve assembly
(2) Flow divider assembly
4.1.3 RELIEF VALVE ASSEMBLY
1. Separate the relief valve assembly (1).
(When reassembling)
• Install the relief valve assembly to the outlet, taking
care not to damage the O-ring
196W942A
196W943A
Item
Relief valve assembly
Tightening torque
49.0 ~ 58.8 Nm
5.0 ~ 6.0 kgf-m
36 ~ 43 lb-ft
Item
Flow divider assembly
Tightening torque
40.0 ~ 50.0 Nm
4.0 ~ 5.0 kgf-m
8.9 ~ 11.2 lb-ft
HYDRAULIC SYSTME - SERVICING