Daedong CK22, Руководство по ремонту

Страница: 188 / 372

5-2 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
Displacement
Angle of swash plate
Charge pump displacement
Maximum working pressure
(Relief setting pressure)
Continuous maximum pressure
Maximum input rpm
Theoretical output rpm
Maximum output torque
(theoretical)
Theoretical corner output
Charge relief pressure
Spiral bevel gear pinion turning torque
PTO shaft lock nut tightening torque
Backlash between
Spiral bevel gear turning torque
Adjusting shims thickness
Backlash between spiral bevel pinion gear
and spiral bevel gear
0 ~ 16.4 cc/rev
16.4 cc/rev
0 ~ 16
16°
4.1 cc/rev
280 kgf/cm 2
3982.5 psi
210 kgf/cm 2
3,200 rpm
0 ~ 3,200 rpm
63.7 Nm
6.5 kgf-m
47 lb-ft
29.1 ps
5 ~ 7 kgf/cm 2
71.1 ~ 99.5 psi
0.98 ~ 1.28 Nm
0.1 ~ 0.13 kgf-m
0.72 ~ 0.94 lb-ft
147.1 ~ 196.1 Nm
15 ~ 20 kgf-m
108.5 ~ 144.7 lb-ft
0.15 ~ 0.25 mm
0.0059 ~ 0.0098 in.
0.8, 1.0, 1.2 mm
0.0314, 0.0393, 0.045 in.
3.9 ~ 6.37 Nm
0.4 ~ 0.65 kgf-m
2.9 ~ 4.7 lb-ft
0.1, 0.2, 0.4 mm
0.0039, 0.0078, 0.0157 in.
0.15 ~ 0.25 mm
0.0059 ~ 0.0098 in.
Reference Value Allowable Limit Item
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
HST Pump Motor
Pump Motor
Differential pinion to
differential side gear
Differential washer
thickness
1. SPECIFICATIONS
HST - SPECIFICATIONS