ENGLISH
GB
81
6.3 - Structure of the menu pages
6.3 - Structure of the menu pages
When switched on, some presentation pages are displayed showing the
When switched on, some presentation pages are displayed showing the
name of the product and the logo, after which the main menu appears.
name of the product and the logo, after which the main menu appears.
The name of each menu, whichever it may be, is always at the top of the
The name of each menu, whichever it may be, is always at the top of the
display.
display.
The following always appear on the main page:
The following always appear on the main page:
Status
Status
: operating status (e.g. standby, go, Fault, input functions)
: operating status (e.g. standby, go, Fault, input functions)
Revs per minute
Revs per minute: value in [rpm]
: value in [rpm]
Pressure
Pressure
: value in [bar] or [psi] depending on the set unit of measure.
: value in [bar] or [psi] depending on the set unit of measure.
Power
Power: value in [kW] of the power absorbed by the device.
: value in [kW] of the power absorbed by the device.
Figure 14: Diagram of possible menu accesses
If the case occurs the following may appear:
If the case occurs the following may appear:
Fault indications
Fault indications
Warning indications
Warning indications
Indications of the functions associated with the inputs
Indications of the functions associated with the inputs
Specific icons
Specific icons
The error conditions are indicated in Table 2. The other displays are indi
-
The error conditions are indicated in Table 2. The other displays are indi
-
cated in Table 9.
cated in Table 9.
Error or status conditions shown on the main page
Identifying code
Description
GO
Motor running
SB
Motor stopped
DIS
Motor status manually disabled
F1
Float function status / alarm
F3
System disable function status / alarm
F4
Low pressure signal function status / alarm
P1
Operating status with auxiliary setpoint 1
P2
Operating status with auxiliary setpoint 2
P3
Operating status with auxiliary setpoint 3
P4
Operating status with auxiliary setpoint 4
Com. icon with
number
Operating status in multi-pump communication with the address
indicated
Com. icon with E Error status of communication in the multi-pump system
EE
Writing and reading the factory settings on EEprom
WARN.
Low voltage
Warning due to lack of supply voltage
Table 9: Status and error messages on the main page
Содержание e.sybox Series
Страница 3: ......