ENGLISH
GB
99
9.2 - Wall installation
9.2 - Wall installation
This product is already set up for installation hanging on the wall with the
This product is already set up for installation hanging on the wall with the
DAB accessory kit, to be purchased separately. The wall installation ap
-
DAB accessory kit, to be purchased separately. The wall installation ap
-
pears as in Fig.19.
pears as in Fig.19.
9.3 -
9.3 -
Installation with quick connection
Installation with quick connection
DAB supplies an accessory kit for Quick Connection of the system. This is
DAB supplies an accessory kit for Quick Connection of the system. This is
a quick coupling base on which to make the connections to the plant and
a quick coupling base on which to make the connections to the plant and
from which the system can be simply connected or disconnected.
from which the system can be simply connected or disconnected.
Advantages:
Advantages:
•
•
possibility of making up the plant on-site, testing it, but remov
-
possibility of making up the plant on-site, testing it, but remov
-
ing the actual system until the moment of delivery, avoiding
ing the actual system until the moment of delivery, avoiding
possible damage (accidental blows, dirt, theft, …);
possible damage (accidental blows, dirt, theft, …);
•
•
it is easy for the Assistance service to replace the system with
it is easy for the Assistance service to replace the system with
a “spare” in the event of special maintenance.
a “spare” in the event of special maintenance.
The system mounted on its quick connection interface appears as in
The system mounted on its quick connection interface appears as in
Fig.20.
Fig.20.
9.4 - Multiple Sets
9.4 - Multiple Sets
9.4.1 - Introduction to multipump systems
9.4.1 - Introduction to multipump systems
By multipump systems we mean a pump set made up of a number of
By multipump systems we mean a pump set made up of a number of
pumps whose deliveries all flow into a common manifold. The devices
pumps whose deliveries all flow into a common manifold. The devices
communicate with one another by means of the connection provided (wire
-
communicate with one another by means of the connection provided (wire
-
less).
less).
The group may be made up of a maximum of 4 devices.
The group may be made up of a maximum of 4 devices.
A multipump system is used mainly for:
A multipump system is used mainly for:
•
•
Increasing hydraulic performance in comparison with a single de
-
Increasing hydraulic performance in comparison with a single de
-
vice.
vice.
•
•
Ensuring continuity of operation in the event of a device developing
Ensuring continuity of operation in the event of a device developing
a fault.
a fault.
•
•
Sharing out the maximum power.
Sharing out the maximum power.
9.4.2 - Making a multipump system
9.4.2 - Making a multipump system
The hydraulic plant must be created as symmetrically as possible to obtain
The hydraulic plant must be created as symmetrically as possible to obtain
a hydraulic load uniformly distributed over all the pumps.
a hydraulic load uniformly distributed over all the pumps.
Figure 20
Figure 19
Содержание e.sybox Series
Страница 3: ......