DAB e.sybox Series, Руководство пользователя

Страница: 45 / 54

ENGLISH
GB
101
• GI Integral gain • GI Integral gain
• GP Proportional gain • GP Proportional gain
• I1 Input 1 setting • I1 Input 1 setting
• I2 Input 2 setting • I2 Input 2 setting
• I3 Input 3 setting • I3 Input 3 setting
• I4 Input 4 setting • I4 Input 4 setting
• OD Type of system • OD Type of system
• PR Remote pressure sensor • PR Remote pressure sensor
• PW Change password • PW Change password
Automatic alignment of sensitive parameters Automatic alignment of sensitive parameters
When a multipump system is detected, the compatibility of the set pa
-
When a multipump system is detected, the compatibility of the set pa
-
rameters is checked. If the sensitive parameters are not aligned among rameters is checked. If the sensitive parameters are not aligned among
all the devices, a message appears on the display of each device asking all the devices, a message appears on the display of each device asking
whether you want to propagate the configuration of that particular device whether you want to propagate the configuration of that particular device
to the whole system. If you accept, the sensitive parameters of the device to the whole system. If you accept, the sensitive parameters of the device
on which you answered the question will be distributed to all the devices on which you answered the question will be distributed to all the devices
in the chain. in the chain.
If there are configurations that are not compatible with the system, these If there are configurations that are not compatible with the system, these
devices are not allowed to propagate their configuration. devices are not allowed to propagate their configuration.
During normal operation, changing a sensitive parameter of a device re
-
During normal operation, changing a sensitive parameter of a device re
-
sults in the automatic alignment of the parameter on all the other devices sults in the automatic alignment of the parameter on all the other devices
without asking for confirmation. without asking for confirmation.
NOTE: NOTE:
The automatic alignment of the sensitive parameters has no effect The automatic alignment of the sensitive parameters has no effect
on all the other types of parameters. on all the other types of parameters.
In the particular case of inserting a device with factory settings in the chain In the particular case of inserting a device with factory settings in the chain
(a device replacing an existing one or a device on which the factory config
-
(a device replacing an existing one or a device on which the factory config
-
uration has been restored), if the present configurations with the exception uration has been restored), if the present configurations with the exception
of the factory configurations are compatible, the device with factory con
-
of the factory configurations are compatible, the device with factory con
-
figuration automatically assumes the sensitive parameters of the chain. figuration automatically assumes the sensitive parameters of the chain.
Parameters with optional alignment Parameters with optional alignment
These are parameters for which it is tolerated that they may not be aligned These are parameters for which it is tolerated that they may not be aligned
among the various devices. At each change of these parameters, when among the various devices. At each change of these parameters, when
you come to press SET or MODE, you are asked if you want to propagate you come to press SET or MODE, you are asked if you want to propagate
the change to the entire communication chain. In this way, if all elements of the change to the entire communication chain. In this way, if all elements of
the chain are the same, it avoids setting the same data on all the devices the chain are the same, it avoids setting the same data on all the devices
List of parameters with optional alignment: List of parameters with optional alignment:
• LA Language • LA Language
• MS Measuring system • MS Measuring system
• AE Anti-blocking • AE Anti-blocking
• AF AntiFreeze • AF AntiFreeze
• O1 Function output 1 • O1 Function output 1
• O2 Function output 2 • O2 Function output 2
• RM Maximum speed • RM Maximum speed
9.4.6 First start of the multipump system 9.4.6 First start of the multipump system
Make the electric and hydraulic connections of the whole system as de
-
Make the electric and hydraulic connections of the whole system as de
-
scribed in par 2.1.1, 2.2.1 and par 3.1. scribed in par 2.1.1, 2.2.1 and par 3.1.
Switch on the devices and create the associations as described in para
-
Switch on the devices and create the associations as described in para
-
graph 7.5.5 – AS: Association of devices. graph 7.5.5 – AS: Association of devices.
9.4.7 Multipump adjustment 9.4.7 Multipump adjustment
When a multipump system is switched on, the addresses are automatically When a multipump system is switched on, the addresses are automatically
assigned and an algorithm selects one device as the adjustment leader. assigned and an algorithm selects one device as the adjustment leader.
The leader decides the speed and starting order of each device in the The leader decides the speed and starting order of each device in the
chain. chain.
The adjustment mode is sequential (the devices start one at a time). When The adjustment mode is sequential (the devices start one at a time). When
starting conditions occur, the first device starts, when it has reached max
-
starting conditions occur, the first device starts, when it has reached max
-
imum speed the next one starts, and then the others in sequence. The imum speed the next one starts, and then the others in sequence. The
starting order is not necessarily in ascending order according to the ma
-
starting order is not necessarily in ascending order according to the ma
-
chine address, but it depends on the working hours done see 7.6.11 - ET: chine address, but it depends on the working hours done see 7.6.11 - ET:
Max. switching time Max. switching time