DAB e.sybox Series, Руководство пользователя

Страница: 28 / 54

ENGLISH
84
GB
7.1.12- FF: Fault log display 7.1.12- FF: Fault log display
Chronological display of the faults that have occurred during system op
-
Chronological display of the faults that have occurred during system op
-
eration. eration.
Under the symbol FF appear two numbers x/y indicating respectively the
Under the symbol FF appear two numbers x/y indicating respectively the
fault displayed and the total number of faults present; to the right of these fault displayed and the total number of faults present; to the right of these
numbers is an indication of the type of fault displayed. numbers is an indication of the type of fault displayed.
The + and – keys scroll through the list of faults: pressing the – key goes
The + and – keys scroll through the list of faults: pressing the – key goes
back through the log and stops at the oldest fault present, pressing the + back through the log and stops at the oldest fault present, pressing the +
key goes forward in the log and stops at the most recent fault. key goes forward in the log and stops at the most recent fault.
The faults are displayed in chronological order starting from the one that
The faults are displayed in chronological order starting from the one that
appeared farthest back in time x=1 to the most recent x=y. The maximum appeared farthest back in time x=1 to the most recent x=y. The maximum
number of faults that can be shown is 64; when that number is reached, the number of faults that can be shown is 64; when that number is reached, the
log starts to overwrite the oldest ones. log starts to overwrite the oldest ones.
This item on the menu displays the list of faults, but does not allow reset.
This item on the menu displays the list of faults, but does not allow reset.
Reset can be carried out only with the dedicated control from item RF on Reset can be carried out only with the dedicated control from item RF on
the TECHNICAL ASSISTANCE MENU. the TECHNICAL ASSISTANCE MENU.
The fault log cannot be deleted with a manual reset, by switching off the
The fault log cannot be deleted with a manual reset, by switching off the
appliance, or by resetting the factory values, unless the procedure de
-
appliance, or by resetting the factory values, unless the procedure de
-
scribed above has been followed. scribed above has been followed.
7.2 - Monitor Menu 7.2 - Monitor Menu
From the main menu, by holding down simultaneously for 2 sec the keys From the main menu, by holding down simultaneously for 2 sec the keys
“SET” and “-“ (minus), or using the selection menu and pr or -, you “SET” and “-“ (minus), or using the selection menu and pr or -, you
can access the MONITOR MENU. can access the MONITOR MENU.
In this menu, by pressing the MODE key, the following values are dis
-
In this menu, by pressing the MODE key, the following values are dis
-
played in sequence played in sequence
7.2.1 - CT: Display contrast 7.2.1 - CT: Display contrast
Adjusts the display contrast. Adjusts the display contrast.
7.2.2 - BK: Display brightness 7.2.2 - BK: Display brightness
Adjusts the backlighting of the display on a scale from 0 to 100. Adjusts the backlighting of the display on a scale from 0 to 100.
7.2.3 - TK: Backlight switch-on time 7.2.3 - TK: Backlight switch-on time
Sets the time that the backlight is lit since the last time a key was pressed. Sets the time that the backlight is lit since the last time a key was pressed.
Values allowed: ‘0’ always off; from 20 sec to 10 min or ‘always on’. Values allowed: ‘0’ always off; from 20 sec to 10 min or ‘always on’.
When the backlight is off, the first time any key is pressed has the sole When the backlight is off, the first time any key is pressed has the sole
effect of restoring the backlighting. effect of restoring the backlighting.
7.2.4 - LA: Language 7.2.4 - LA: Language
Display in one of the following languages: Display in one of the following languages:
• • Italian Italian
• •
English English
• •
French French
• •
German German
• •
Spanish Spanish
• •
Dutch Dutch
• •
Swedish Swedish
• •
Turkish Turkish
• • Slovak Slovak
• •
Romanian Romanian
• • Russian Russian
• •
Thai Thai
7.2.5 - TE: Dissipator temperature display 7.2.5 - TE: Dissipator temperature display
7.3 - Setpoint Menu 7.3 - Setpoint Menu
From the main menu, hold down simultaneously the “MODE” and “SET” From the main menu, hold down simultaneously the “MODE” and “SET”
keys until “SP” appears on the display (or use the selection menu pressing keys until “SP” appears on the display (or use the selection menu pressing
+ or -). The + and – keys allow you respectively to increase and decrease + or -). The + and – keys allow you respectively to increase and decrease
the plant boosting pressure. the plant boosting pressure.
Press SET to leave this menu and return to the main menu. Press SET to leave this menu and return to the main menu.
The adjustment range is 1-6 bar (14-87 psi). The adjustment range is 1-6 bar (14-87 psi).
7.3.1 - SP: Setting the setpoint pressure 7.3.1 - SP: Setting the setpoint pressure
Pressure at which the plant is pressurised if there are no active auxiliary Pressure at which the plant is pressurised if there are no active auxiliary
pressure regulating functions. pressure regulating functions.
7.3.2 - Setting the auxiliary pressures 7.3.2 - Setting the auxiliary pressures
The device has the possibility of varying the setpoint pressure according The device has the possibility of varying the setpoint pressure according
to the status of the inputs, up to 4 auxiliary pressures can be set for a total to the status of the inputs, up to 4 auxiliary pressures can be set for a total
of 5 different setpoints. For the electrical connections refer to the control of 5 different setpoints. For the electrical connections refer to the control
unit manual; for the software settings see paragraph 7.6.15.3 - Setting the unit manual; for the software settings see paragraph 7.6.15.3 - Setting the
auxiliary point input function. auxiliary point input function.