DAB e.sybox Series, Руководство пользователя

Страница: 20 / 54

ENGLISH
76
GB
6 - THE KEYPAD AND THE DISPLAY 6 - THE KEYPAD AND THE DISPLAY
The user interface is composed of a keypad with 128x240 pixel LCD dis
-
The user interface is composed of a keypad with 128x240 pixel LCD dis
-
play and with POWER, COMM, ALARM warning leds as can be seen in play and with POWER, COMM, ALARM warning leds as can be seen in
Figure 12. Figure 12.
The display shows the values and the statuses of the device, with indica
-
The display shows the values and the statuses of the device, with indica
-
tions on the functionality of the various parameters. tions on the functionality of the various parameters.
The functions of the keys are summed up in Table 6. The functions of the keys are summed up in Table 6.
The MODE key allows you to move on to the next items in the same
menu. Holding it down for at least 1 sec allows you to skip to previous
menu item.
The SET key allows you to leave the current menu.
Figure 12: Aspect of the user interface
Decreases the current parameter (if it is an editable parameter).
Increases the current parameter (if it is an editable parameter).
Holding down the “+” key or the “-” key allows the automatic increase/ Holding down the “+” key or the “-” key allows the automatic increase/
decrease of the parameter selected. After the “+” key or the “-” key has decrease of the parameter selected. After the “+” key or the “-” key has
been held down for 3 seconds, the automatic increase/decrease speed been held down for 3 seconds, the automatic increase/decrease speed
increases. increases.
When the + key or the - key is pressed the selected value is When the + key or the - key is pressed the selected value is
modified and saved immediately in the permanent memory (EE
-
modified and saved immediately in the permanent memory (EE
-
prom). If the machine is switched off, even accidentally, in this prom). If the machine is switched off, even accidentally, in this
phase it does not cause the loss of the parameter that has just phase it does not cause the loss of the parameter that has just
been set. been set.
The SET key is only for leaving the current menu and is not nec
-
The SET key is only for leaving the current menu and is not nec
-
essary for saving the changes made. Only in particular cases essary for saving the changes made. Only in particular cases
described in chapter 0 are some values updated by pressing described in chapter 0 are some values updated by pressing
“SET” or “MODE”. “SET” or “MODE”.
Warning leds Warning leds
• Power • Power
White led. Lit with a fixed light when the machine is powered. White led. Lit with a fixed light when the machine is powered.
Blinking when the machine is disabled (see par. 6.5). Blinking when the machine is disabled (see par. 6.5).
• Alarm • Alarm
Red led. Lit with a fixed light when the machine is blocked by an Red led. Lit with a fixed light when the machine is blocked by an
error. error.
• Communication • Communication
Blue led. Lit with a fixed light when communication wireless is Blue led. Lit with a fixed light when communication wireless is
used and is working correctly. used and is working correctly. It blinks with a slow frequency if, It blinks with a slow frequency if,
Table 6: Key functions