DAB e.sybox Series, Руководство пользователя

Страница: 52 / 54

ENGLISH
108
GB
• •
If several e.sybox units have to be updated the procedure must be re
-
If several e.sybox units have to be updated the procedure must be re
-
peated each time. peated each time.
Procedure Procedure
1. 1. Associate the devices (see par. 7.5.5). A pop-up will appear on the Associate the devices (see par. 7.5.5). A pop-up will appear on the
display of both e.sybox units saying: display of both e.sybox units saying:
Where in place of x.y the firmware version of the e.sybox will appear. Where in place of x.y the firmware version of the e.sybox will appear.
2. 2. Press the [+] key on both machines. Press the [+] key on both machines.
3. 3. Wait for the update to be successfully completed and for both ma
-
Wait for the update to be successfully completed and for both ma
-
chines to restart. chines to restart.
Problem solving Problem solving
If the update has not been successful, the machine that you were trying to If the update has not been successful, the machine that you were trying to
update (Salve) goes into an inconsistent status which does not allow a new update (Salve) goes into an inconsistent status which does not allow a new
automatic update. In this case the updating procedure must be performed automatic update. In this case the updating procedure must be performed
manually. manually.
11.2.1.3 - Semiautomatic updating 11.2.1.3 - Semiautomatic updating
Requirements Requirements
• •
It is carried out between 2 e.sybox units at a time. It is carried out between 2 e.sybox units at a time.
• •
The e.sybox used as the Master must have a firmware version of 4.00 The e.sybox used as the Master must have a firmware version of 4.00
or more. or more.
• •
The e.sybox used as the Slave must have a firmware version of less The e.sybox used as the Slave must have a firmware version of less
than 4.00. than 4.00.
• •
It is necessary to have associated the devices with each other. It is necessary to have associated the devices with each other.
• •
If several e.sybox units have to be updated the procedure must be re
-
If several e.sybox units have to be updated the procedure must be re
-
peated each time. peated each time.
Procedure Procedure
1. 1. Associate the devices. Associate the devices.
Association between different
firmware version
V x.y
Press + to update
The e.sybox with the older firmware (Slave) will show the screen: The e.sybox with the older firmware (Slave) will show the screen:
The e.sybox with firmware version of 4.00 or more will show the screen: The e.sybox with firmware version of 4.00 or more will show the screen:
Where in place of x.y the firmware version of the e.sybox will appear. Where in place of x.y the firmware version of the e.sybox will appear.
2. 2. Press the [+] key on the Master machine (the one with firmware ver
-
Press the [+] key on the Master machine (the one with firmware ver
-
sion of 4.00 or more). sion of 4.00 or more).
3. 3. Switch off the electric power supply to the Slave e.sybox and wait for Switch off the electric power supply to the Slave e.sybox and wait for
the display to switch off. the display to switch off.
4. 4. On the Slave e.sybox, supply power by holding down simultaneously On the Slave e.sybox, supply power by holding down simultaneously
the [MODE] and [-] keys until the update screen appears. the [MODE] and [-] keys until the update screen appears.
5. 5. Wait for the update to be successfully completed and for both ma
-
Wait for the update to be successfully completed and for both ma
-
chines to restart. chines to restart.
Problem solving Problem solving
If the update has not been successful, the machine that you were trying If the update has not been successful, the machine that you were trying
to update (Slave) goes into an inconsistent status which does not allow a to update (Slave) goes into an inconsistent status which does not allow a
new semiautomatic update. In this case the updating procedure must be new semiautomatic update. In this case the updating procedure must be
performed manually. performed manually.
11.2.2. - Updating the e.sybox by e.sylink 11.2.2. - Updating the e.sybox by e.sylink
An e.sybox can also be updated by e.sylink. For the procedure, refer to An e.sybox can also be updated by e.sylink. For the procedure, refer to
the e.sylink manual. the e.sylink manual.
12 - TROUBLESHOOTING 12 - TROUBLESHOOTING
Before starting to look for faults it is necessary to disconnect the Before starting to look for faults it is necessary to disconnect the
power supply to the pump (take the plug out of the socket). power supply to the pump (take the plug out of the socket).
Wait
Association between different
firmware version
V x.y
Press + to update