manualshive.com logo in svg

D-Link xStack DGS-3426P, Руководство пользователя

D-Link xStack DGS-3426P - мощный управляемый коммутатор с поддержкой PoE, идеально подходит для централизованных сетей. Скачайте бесплатное Руководство пользователя с нашего сайта для подробной информации об установке и настройке. Посетите manualshive.com сейчас, чтобы скачать Руководство пользователя.

Поделиться
Скачать
background image

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch 

IPv6 Address 

Use this field to set a Global Unicast Address for the Switch. This address will be used to 
access the network outside of the local link. 

NS Retransmit Time 

Use this field to set the interval, in seconds that this Switch will produce Neighbor 
Solicitation packets to be sent out over the local network. This is used to discover IPv6 
neighbors on the local link. The user may select a time between 0 and 65535 
milliseconds. Very fast intervals, represented by a low number, are not recommended for 
this field. 

Prefix Options 

Prefix 

Use this field to set a prefix for Global Unicast IPv6 addresses to be assigned to other 
nodes on the link-local network. This prefix is carried in the Router Advertisement 
message to be shared on the link-local network. The user must first have a Global 
Unicast Address set for the Switch. 

Preferred Life Time

 

This field states the time that this prefix is advertised as being preferred on the link local 
network, when using stateless address configuration. The user may configure a time 
between 0 and 4294967295 milliseconds, with a default setting of 604800 milliseconds.  

Valid Life Time 

This field states the time that this prefix is advertised as valid on the link local network, 
when using stateless address configuration. The user may configure a time between 0 
and 4294967295 milliseconds.  

On Link Flag 

Setting this field to 

Enabled

 will denote, within the IPv6 packet, that the IPv6 prefix 

configured here is assigned to this link-local network. Once traffic has been successfully 
sent to these nodes with this specific IPv6 prefix, the nodes will be considered reachable 
on the link-local network. 

Autonomous Flag 

Setting this field to 

Enabled

 will denote that

 

this prefix may be used to autoconfigure IPv6 

addresses on the link-local network. 

Router Advertisement Settings 

RA Router 
Advertisement 

Use this pull-down menu to enable or disable the switch as being capable of accepting 
solicitation from a neighbor, and thus becoming an IPv6 neighbor. Once enabled, this 
Switch is now capable of producing Router Advertisement messages to be returned to 
querying neighbors.

 

RA Router Lifetime 

This time represents the validity of this interface to be the default router for the link-local 
network. A value of 0 represents that this Switch should not be recognized as the default 
router for this link-local network. The user may set a time between 0 and 9000 seconds 
with a default setting of 1800 seconds. 

RA Reachable Time 

This field will set the time that remote IPv6 nodes are considered reachable. In essence, 
this is the Neighbor Unreachability Detection field once confirmation of the access to this 
node has been made. The user may set a time between 0 and 36000000 milliseconds 
with a default setting of 1200000 milliseconds. A very low value is not recommended. 

RA Retransmit Time 

Used to set an interval time between 0 and 4294967295 milliseconds for the dispatch of 
router advertisements by this interface over the link-local network, in response to a 
Neighbor Solicitation message. If this Switch is set as the default router for this local link, 
this value should not exceed the value stated in the 

Life Time

 field previously mentioned. 

Setting this field to zero will specify that this switch will not specify the Retransmit Time 
for the link-local network. (therefore it will be specified by another router on the link-local 
network. The default value is 0 milliseconds. 

RA Managed Flag 

Use the pull-down menu to enable or disable the Managed flag. When enabled, this will 
trigger the router to use a stateful autoconfiguration process to get both Global and link-
local IPv6 addresses for the Switch. The default setting is 

Disabled

. 

RA Other Configure 
Flag 

Use the pull-down menu to enable or disable the Managed flag. When enabled, this will 
trigger the router to use a stateful autoconfiguration process to get configuration 
information that is not address information, yet is important to the IPv6 settings of the 
Switch. The default setting is 

Disabled

. 

44 

     

Содержание xStack DGS-3426P































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3426P

Fairchild FSD200 Manual preview
FSD200
Бренд: Fairchild Страницы: 14
Baxall DVS24 Installation And Operating Instructions Manual preview
DVS24
Бренд: Baxall Страницы: 33
PureLink HDS-21R Owner'S Manual preview
HDS-21R
Бренд: PureLink Страницы: 10
Open Mesh S8-L Quick Start Up Manual preview
S8-L
Бренд: Open Mesh Страницы: 2
protech 4PET0301SC User Manual preview
4PET0301SC
Бренд: protech Страницы: 4
A-Neuvideo ANI-H-KIT Instruction Manual preview
ANI-H-KIT
Бренд: A-Neuvideo Страницы: 28
ATEN CS428 User Manual preview
CS428
Бренд: ATEN Страницы: 26
Endress+Hauser Liquipoint FTW33 Operating Instructions Manual preview
Liquipoint FTW33
Бренд: Endress+Hauser Страницы: 48
Uniclass AI-CP02A Quick Installation Manual preview
AI-CP02A
Бренд: Uniclass Страницы: 2
Flamingo SF500WD Quick Start Manual preview
SF500WD
Бренд: Flamingo Страницы: 2
Intel Ethernet Switch Boards Product Manual preview
Ethernet Switch Boards
Бренд: Intel Страницы: 52
Lindy 32320 User Manual preview
32320
Бренд: Lindy Страницы: 12
Kensence S-Mix-Pro 18*18 Operation Manual preview
S-Mix-Pro 18*18
Бренд: Kensence Страницы: 24
Eaton LS ZB Series Original Operating Instructions preview
LS ZB Series
Бренд: Eaton Страницы: 12
Subject Link RPT-2012/P-4F-T-1 Series Hardware Installation Manual preview
RPT-2012/P-4F-T-1 Series
Бренд: Subject Link Страницы: 2
LEGRAND Valena Life LE-752107 User Manual preview
Valena Life LE-752107
Бренд: LEGRAND Страницы: 5
System Q ScatterBox POE308 Quick Start Manual preview
ScatterBox POE308
Бренд: System Q Страницы: 2
Madas CE-51AT1438 Manual preview
CE-51AT1438
Бренд: Madas Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды