D-Link xStack DGS-3426P, Руководство пользователя

Страница: 210 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 9- 15. Authentication Server Group Table Add Settings window
Enter a group name of up to 15 characters into the Group Name field and click Apply . The entry should appear in the
Authentication Server Group Settings window.
NOTE: The user must configure Authentication Server Hosts using the Authentication Server
Hosts window before adding hosts to the list. Authentication Server Hosts must be configured for
their specific protocol on a remote centralized server before this function can work properly.
NOTE: The three built in server groups can only have server hosts running the same TACACS
daemon. TACACS/XTACACS/ protocols are separate entities and are not compatible
with each other.
Authentication Server Host
This window will set user-defined Authentication Server Hosts for the TACACS / XTACACS / / RADIUS security
protocols on the Switch. When a user attempts to access the Switch with Authentication Policy enabled, the Switch will send
authentication packets to a remote TACACS / XTACACS / / RADIUS server host on a remote host. The TACACS /
XTACACS / / RADIUS server host will then verify or deny the request and return the appropriate message to the
Switch. More than one authentication protocol can be run on the same physical server host but, remember that TACACS /
XTACACS / / RADIUS are separate entities and are not compatible with each other. The maximum supported number
of server hosts is 16.
To view the following window, click Security > Access Authentication Control > Authentication Server Host :
Figure 9- 16. Authentication Server Host window
To add an Authentication Server Host, click the Add button, revealing the following window:
Figure 9- 17. Authentication Server Host Setting - Add window
196