xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Login Method Lists
This command will configure a user-defined or default
Login Method List
of authentication techniques for users logging on to the
Switch. The sequence of techniques implemented in this command will affect the authentication result. For example, if a user
enters a sequence of techniques, for example TACACS - XTACACS- local, the Switch will send an authentication request to the
first TACACS host in the server group. If no response comes from the server host, the Switch will send an authentication request
to the second TACACS host in the server group and so on, until the list is exhausted. At that point, the Switch will restart the same
sequence with the following protocol listed, XTACACS. If no authentication takes place using the XTACACS list, the local
account database set in the Switch is used to authenticate the user. When the local method is used, the privilege level will be
dependant on the local account privilege configured on the Switch.
Successful login using any of these techniques will give the user a "User" privilege only. If the user wishes to upgrade his or her
status to the administrator level, the user must use the
Enable Admin
window, in which the user must enter a previously
configured password, set by the administrator. (See the
Enable Admin
part of this section for more detailed information
concerning the
Enable Admin
command.)
To view the following screen click
Security Management > Access Authentication Control > Login Method Lists
:
Figure 9- 18. Login Method List Settings window
The Switch contains one
Method List
that is set and cannot be removed, yet can be modified. To delete a Login Method List
defined by the user, click the under the
Delete
heading corresponding to the entry desired to be deleted. To modify a Login
Method List, click on its hyperlinked
Method List Name
. To configure a new Method List, click the
Add
button.
Both actions will result in the same screen to configure:
Figure 9- 19. Login Method List - Edit window (default)
Figure 9- 20. Login Method List – Add window
To define a Login Method List, set the following parameters and click
Apply
:
198
Содержание xStack DGS-3426P
Страница 307: ...software updates D Link D Link D Link 210 86 11 114 210 86 53 172 09 00 17 00 e mail support dlink gr D Link Internet...
Страница 310: ...D Link D Link D Link D Link 495 744 00 99 http www dlink ru e mail support dlink ru...
Страница 316: ...International Offices...
Страница 318: ......