D-Link xStack DGS-3426P, Руководство пользователя

Страница: 72 / 318

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
System Severity Settings
The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both. The level at which the alert
triggers either a log entry or a trap message can be set as well. Use the
System Severity Settings menu to set the criteria for alerts.
The current settings are displayed below the System Severity Table. In the Administration folder, click System Severity
Settings , to view the window shown below.
Figure 6- 24. System Severity Settings
Use the drop-down menus to configure the parameters described below.
Parameter Description
System Severity Choose how the alerts are used from the drop-down menu. Select log to send the alert of the
Severity Type configured to the Switch’s log for analysis. Choose trap to send it to an SNMP
agent for analysis, or select all to send the chosen alert type to an SNMP agent and the
Switch’s log for analysis.
Severity Level Choose what level of alert will trigger sending the log entry or trap message as defined by the
Severity Name. Select
critical to send only critical events to the Switch’s log or SNMP agent.
Choose warning to send critical and warning events to the Switch’s log or SNMP agent.
Select information send informational, warning and critical events to the Switch’s log or
SNMP agent.
Click Apply to implement the new System Severity Settings.
58