xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Traffic Segmentation
Traffic segmentation is used to limit traffic flow from a single port to a group of ports. This method of segmenting the flow of
traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of directing traffic that does not
increase the overhead of the Master switch CPU.
Open the
Security
folder and click
Traffic Segmentation
, to view the screen shown below.
Figure 9- 25. Current Traffic Segmentation Table
Click on the
Setup
button to open the
Setup Forwarding ports
menu, as shown below.
Figure 9- 26. Setup Forwarding Ports
Configuring traffic segmentation on the xStack DGS-3400 switch series is accomplished in two parts. First, select a switch in the
switch stack by using the
Unit
pull-down menu, and then specify a port from the switch, using the
Port
pull-down menu. Next,
specify which ports on the switch that are able to receive packets from the switch and port specified in the first part.
Clicking the
Apply
button will enter the combination of transmitting port and allowed receiving ports into the Switch’s
Traffic
Segmentation
table.
202
Содержание xStack DGS-3426P
Страница 307: ...software updates D Link D Link D Link 210 86 11 114 210 86 53 172 09 00 17 00 e mail support dlink gr D Link Internet...
Страница 310: ...D Link D Link D Link D Link 495 744 00 99 http www dlink ru e mail support dlink ru...
Страница 316: ...International Offices...
Страница 318: ......