manualshive.com logo in svg

D-Link xStack DGS-3426P, Руководство пользователя

D-Link xStack DGS-3426P - мощный управляемый коммутатор с поддержкой PoE, идеально подходит для централизованных сетей. Скачайте бесплатное Руководство пользователя с нашего сайта для подробной информации об установке и настройке. Посетите manualshive.com сейчас, чтобы скачать Руководство пользователя.

Поделиться
Скачать
background image

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch 

Parameter                 Description 

Unit 

Select the switch in the switch stack for which to configure VLANs. 

VID (VLAN ID) 

Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an existing VLAN in 
the Modify window. VLANs can be identified by either the VID or the VLAN name. 

VLAN Name 

Allows the entry of a name for the new VLAN in the Add window, or for editing the VLAN name in 
the Modify window. 

Advertisement 

Enabling this function will allow the Switch to send out GVRP packets to outside sources, 
notifying that they may join the existing VLAN. 

Type 

Displays the type of protocol associated with this VLAN. 

Protocol ID 

The following parameters allow for the creation of protocol-based VLANs. The Switch supports 
14 pre-configured protocol-based VLANs plus one user-defined protocol based VLAN and one 
user defined packet ID setting where the administrator may configure the settings for the 
appropriate protocol or ID for forwarding packets (16 total). Selecting a specific protocol will 
indicate which protocol will be utilized in determining the VLAN ownership of a tagged packet. 
Pre-set protocol-based VLANs on the Switch include: 

Port

 – Using this parameter will allow the creation of a normal 802.1Q VLAN on the Switch. 

IP

 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the 

packet header is concurrent with this protocol. This packet header information is based on the 
Ethernet protocol. 

RARP - 

Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in 

the packet header is concurrent with this protocol. This packet header information is defined by 
the Reverse Address Resolution (RARP) Protocol. 

IPX 802.3

 - Using this parameter will instruct the Switch to forward packets to this VLAN if the tag 

in the packet header is concurrent with this protocol. This packet header information is defined by 
Novell NetWare 802.3 (IPX - Internet Packet Exchange). 

IPX 802.2 - 

Using this parameter will instruct the Switch to forward packets to this VLAN if the tag 

in the packet header is concurrent with this protocol. This packet header information is defined by 
Novell NetWare 802.2 (IPX - Internet Packet Exchange). 

IPX SNAP 

- Using this parameter will instruct the Switch to forward packets to this VLAN if the 

tag in the packet header is concurrent with this protocol. This packet header information is 
defined by Novell and the Sub Network Access Protocol (SNAP). 

IPX Ethernet2 - 

Using this parameter will instruct the Switch to forward packets to this VLAN if 

the tag in the packet header is concurrent with this protocol. This packet header information is 
defined by Novell Ethernet II Protocol. 

Apple Talk 

- Using this parameter will instruct the Switch to forward packets to this VLAN if the 

tag in the packet header is concurrent with this protocol. This packet header information is 
defined by the AppleTalk protocol. 

DEC LAT - 

Using this parameter will instruct the Switch to forward packets to this VLAN if the tag 

in the packet header is concurrent with this protocol. This packet header information is defined by 
the Digital Equipment Corporation (DEC) Local Area Transport (LAT) protocol.

 

SNA 802.2 - 

Using this parameter will instruct the Switch to forward packets to this VLAN if the 

tag in the packet header is concurrent with this protocol. This packet header information is 
defined by the Systems Network Architecture (SNA) 802.2 Protocol. 

SNA Ethernet2

 - Using this parameter will instruct the Switch to forward packets to this VLAN if 

the tag in the packet header is concurrent with this protocol. This packet header information is 
defined by the Systems Network Architecture (SNA) Ethernet II Protocol. 

Net Bios - 

Using this parameter will instruct the Switch to forward packets to this VLAN if the tag 

in the packet header is concurrent with this protocol. This packet header information is defined by 
the NetBIOS Protocol. 

115 

     

Содержание xStack DGS-3426P































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для xStack DGS-3426P

TAMS 1800 Series Installation & Operation Manual preview
1800 Series
Бренд: TAMS Страницы: 28
ADDER GEMAV2GEM Installation And Use Manual preview
GEMAV2GEM
Бренд: ADDER Страницы: 46
Touch-plate 10138 Manual preview
10138
Бренд: Touch-plate Страницы: 12
Z-Band ZBT0100052 User Manual And Installation Manual preview
ZBT0100052
Бренд: Z-Band Страницы: 13
Quintech RFS 0702 Operation And Adjustment Procedure preview
RFS 0702
Бренд: Quintech Страницы: 2
N-Tron 302MC-XX Installation Manual preview
302MC-XX
Бренд: N-Tron Страницы: 16
Manhattan 177290 User Manual preview
177290
Бренд: Manhattan Страницы: 4
Lindy 38032 User Manual preview
38032
Бренд: Lindy Страницы: 4
Lindy 38042 Quick Start Manual preview
38042
Бренд: Lindy Страницы: 5
HDTV Supply HDTVMT0808140 User Manual preview
HDTVMT0808140
Бренд: HDTV Supply Страницы: 21
Larson Electronics GAU-125V-20A-P Instruction Manual preview
GAU-125V-20A-P
Бренд: Larson Electronics Страницы: 2
DANLERS ControlZAPP CZ CESR 10VDC Installation Notes preview
ControlZAPP CZ CESR 10VDC
Бренд: DANLERS Страницы: 2
NeoPro DOC42 Integrator Manual preview
DOC42
Бренд: NeoPro Страницы: 36
IBM 8265 Nways ATM Switch Product Description preview
8265 Nways ATM Switch
Бренд: IBM Страницы: 100
DANLERS CESRA PIR 10VDC Installation Notes preview
CESRA PIR 10VDC
Бренд: DANLERS Страницы: 2
Veris Industries Hawkeye H950 Installation Manual preview
Hawkeye H950
Бренд: Veris Industries Страницы: 2
socomec SIRCO MOT PV UL Instruction Manual preview
SIRCO MOT PV UL
Бренд: socomec Страницы: 20
ENSIM SENSORS DX-ELB 11 Operating Manual preview
DX-ELB 11
Бренд: ENSIM SENSORS Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды