xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Parameter Description
Group ID
Select an ID number for the group, between
1
and 32.
State
Trunk groups can be toggled between
Enabled
and
Disabled
. This is used to turn a port
trunking group on or off. This is useful for diagnostics, to quickly isolate a bandwidth
intensive network device or to have an absolute backup aggregation group that is not under
automatic control.
Master Port
Choose the Master Port for the trunk group using the pull-down menu.
Unit
Select the switch in the switch stack to be modified.
Member Ports
Choose the members of a trunked group. Up to eight ports per group can be assigned to a
group.
Flooding Port
A trunking group must designate one port to allow transmission of broadcasts, multicasts and
unknown unicasts.
Active Port
Shows the port that is currently forwarding packets.
Type
This pull-down menu allows users to select between
Static
and
LACP
(Link Aggregation
Control Protocol). LACP allows for the automatic detection of links in a Port Trunking Group.
After setting the previous parameters, click
Apply
to allow your changes to be implemented. Successfully created trunk groups
will be show in the
Current Link Aggregation Group Entries
.
NOTE:
To configure the Algorithm for Link Aggregation, please refer back to the DGS-
3400 Web Management Tool and select the Link Aggregation Algorithm located on that
web page. The description for this function may be found in the explanation for the
Device Information window located earlier in this manual.
126
Содержание xStack DGS-3426P
Страница 307: ...software updates D Link D Link D Link 210 86 11 114 210 86 53 172 09 00 17 00 e mail support dlink gr D Link Internet...
Страница 310: ...D Link D Link D Link D Link 495 744 00 99 http www dlink ru e mail support dlink ru...
Страница 316: ...International Offices...
Страница 318: ......