xStack Gigabit Layer 3 Switch Command Line Interface Manual
config dst
| 90 | 120]}]
Description
DST can be enabled and configured using this command. When
enabled this will adjust the system clock to comply with any DST
requirement. DST adjustment effects system time for both
manually configured time and time set using SNTP service.
Parameters
disable
- Disable the DST seasonal time adjustment for the
Switch.
repeating
- Using repeating mode will enable DST seasonal time
adjustment. Repeating mode requires that the DST beginning
and ending date be specified using a formula. For example,
specify to begin DST on Saturday during the second week of
April and end DST on Sunday during the last week of October.
annual
- Using annual mode will enable DST seasonal time
adjustment. Annual mode requires that the DST beginning and
ending date be specified concisely. For example, specify to
begin DST on April 3 and end DST on October 14.
s_week
- Configure the week of the month in which DST begins.
e_week
- Configure the week of the month in which DST ends.
s_day
– Configure the day of the week in which DST begins.
e_day
- Configure the day of the week in which DST ends.
e_mth
- Configure the month in which DST ends.
s_time
– Configure the time of day to begin DST.
e_time
- Configure the time of day to end DST.
s_date
- Configure the specific date (day of the month) to begin
•
<start_week 1-4,last>
- The number of the week during the
month in which DST begins where 1 is the first week, 2 is
the second week and so on, last is the last week of the
month.
•
<end_week 1-4,last>
- The number of the week during the
month in which DST ends where 1 is the first week, 2 is
the second week and so on, last is the last week of the
month.
•
<start_day sun-sat>
- The day of the week in which DST
begins expressed using a three character abbreviation
(sun, mon, tue, wed, thu, fri, sat).
•
<end_day sun-sat>
- The day of the week in which DST
ends expressed using a three character abbreviation (sun,
mon, tue, wed, thu, fri, sat).
s_mth
- Configure the month in which DST begins.
•
<start_time hh:mm>
- Time is expressed using a 24-hour
clock, in hours and minutes.
•
<start_mth 1-12>
- The month to begin DST expressed as
a number.
•
<end_mth 1-12>
- The month to end DST expressed as a
number.
•
<end_time hh:mm>
- Time is expressed using a 24-hour
clock, in hours and minutes.
258
