xStack Gigabit Layer 3 Switch Command Line Interface Manual
config authen server_group
utilizing the protocol may be added to this group.
radius
- Use this parameter to utilize the built-in RADIUS
server protocol on the Switch. Only server hosts utilizing
the RADIUS protocol may be added to this group.
<string 15>
- Enter an alphanumeric string of up to 15
characters to define the previously created server group.
This group may add any combination of server hosts to it,
regardless of protocol.
[add | delete]
– Enter the correct parameter to add or delete a server
host from a server group.
server_host <ipaddr>
- Enter the IP address of the previously
configured server host to add or delete.
protocol
– Enter the protocol utilized by the server host. There are
four options:
Restrictions Only
administrator-level users can issue this command.
tacacs
– Use this parameter to define the protocol if the
server host is using the TACACS authentication protocol.
xtacacs
– Use this parameter to define the protocol if the
server host is using the XTACACS authentication protocol.
– Use this parameter to define the protocol if the
server host is using the authentication protocol.
radius
– Use this parameter to define the protocol if the
server host is using the RADIUS authentication protocol.
Example usage:
To add an authentication host to server group “group_1”:
DGS-3324SRi:4#config authen server_group group_1 add server_host
10.1.1.121 protocol
Command: config authen server_group group_1 add server_host
10.1.1.121 protocol
Success.
DGS-3324SRi:4#
delete authen server_group
Purpose
Used to delete a user-defined authentication server group.
Syntax
delete authen server_group <string 15>
Description
This command will delete an authentication server group.
Parameters
<string 15>
- Enter an alphanumeric string of up to 15 characters to
define the previously created server group to delete.
Restrictions Only
administrator-level users can issue this command.
179
