xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config cpu access_profile
•
vlan <vlan_name 32>
−
Specifies that the access profile will apply to
only to this VLAN.
•
vlan <vlan_name 32>
−
Specifies that the access profile will apply to
only this VLAN.
•
source_mac <macaddr>
−
Specifies that the access profile will apply
to this source MAC address.
•
destination_mac <macaddr>
−
Specifies that the access profile will
apply to this destination MAC address.
•
ethernet_type <hex 0x0-0xffff>
−
Specifies that the access profile will
apply only to packets with this hexadecimal 802.1Q Ethernet type
value in the packet header.
ip
−
Specifies that the Switch will look into the IP fields in each packet.
•
source_ip <ipaddr>
−
Specifies that the access profile will apply to
only packets with this source IP address.
•
destination_ip <ipaddr>
−
Specifies that the access profile will apply to
only packets with this destination IP address.
•
dscp <value 0-63>
−
Specifies that the access profile will apply only to
packets that have this value in their Type-of-Service (DiffServ code
point, DSCP) field in their IP packet header
•
icmp
−
Specifies that the Switch will examine the Internet Control
Message Protocol (ICMP) field within each packet.
•
type <value 0-255>
−
Specifies that the access profile will
apply to this ICMP type value.
•
code <value 0-255>
−
Specifies that the access profile will
apply to this ICMP code.
•
igmp
−
Specifies that the Switch will examine the Internet Group
Management Protocol (IGMP) field within each packet.
•
type <value 0-255>
−
Specifies that the access profile will
apply to packets that have this IGMP type value.
•
tcp
−
Specifies that the Switch will examine the Transmission Control
Protocol (TCP) field within each packet.
•
src_port <value 0-65535>
−
Specifies that the access profile
will apply only to packets that have this TCP source port in
their TCP header.
•
dst_port <value 0-65535>
−
Specifies that the access profile
will apply only to packets that have this TCP destination port
in their TCP header.
•
protocol_id <value 0-255>
−
Specifies that the switch will examine the
Protocol field in each packet and if this field contains the value
entered here, apply the following rules.
•
udp
−
Specifies that the Switch will examine the Transmission Control
Protocol (TCP) field within each packet.
•
src_port <value 0-65535>
−
Specifies that the access profile
will apply only to packets that have this UDP source port in
their header.
•
dst_port <value 0-65535>
−
Specifies that the access profile
will apply only to packets that have this UDP destination port
231