xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Usage Example
Command: show ospf aggregation
DES-6500:4#
To display OSPF area aggregation settings:
DES-6500:4#show ospf aggregation
OSPF Area Aggregation Settings
Area ID Aggregated LSDB Advertise
Network Address Type
------------ --------------------- -------------- -------------
10.1.1.1 10.0.0.0/8 Summary Enabled
10.1.1.1 20.2.0.0/16 Summary Enabled
Total Entries: 2
show ospf lsdb
Purpose
Used to display the OSPF Link State Database (LSDB).
Syntax
show ospf lsdb {area_id <area_id> | advertise_router
<ipaddr> | type [rtrlink | netlink | summary | assummary |
asextlink]}
Description
This command will display the current OSPF Link State Database
(LSDB).
Parameters
area_id <area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
advertise_router <ipaddr>
−
The router ID of the advertising router.
type [rtrlink | netlink | summary | assummary | asextlink]
−
The type
of link.
Restrictions None.
NOTE:
When this command displays a “
*
” (a star symbol) in the OSPF
LSDB table for the
area_id
or the
Cost
, this is interpreted as “no area ID”
for external LSAs, and as “no cost given” for the advertised link.
Usage Example:
To display the link state database of OSPF:
313