xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show lacp_port
Purpose
Used to display current LACP port mode settings.
Syntax
show lacp_port {<portlist>}
Description
This command will display the LACP mode settings as they are
currently configured.
Parameters
<portlist>
- Specifies a range of ports that will be displayed. The port
list is specified by listing the lowest slot number and the beginning
port number on that slot, separated by a colon. Then the highest slot
number, and the highest port number of the range (also separated
by a colon) are specified. The beginning and end of the port list
range are separated by a dash. For example, 1:3 specifies slot
number 1, port 3. 2:4 specifies slot number 2, port 4. 1:3-2:4
specifies all of the ports between slot 1, port 3 and slot 2, port 4
−
in
numerical order.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To display LACP port mode settings:
DES-6500:4#show lacp_port 1:1-1:8
Command: show lacp_port 1:1-1:8
1:6 Active
Port Activity
------ --------
1:1 Active
1:2 Active
1:3 Active
1:4 Active
1:5 Active
1:7 Active
1:8 Active
DES-6500:4#
133
