xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config rip
reception of RIP packets.
state [enabled | disabled]
−
Allows RIP to be enabled and
disabled on the Switch.
Restrictions Only
administrator-level users can issue this command.
•
v1_only
−
Specifies that only RIP v1 packets will be
transmitted.
•
v2_only
- Specifies that only RIP v2 packets will be
transmitted.
•
v1_or_v2
- Specifies that only RIP v1 or v2 packets will be
transmitted.
Example Usage:
To change the RIP receive mode for the IP interface System:
DES-6500:4#config rip ipif System rx_mode v1_only
Command: config rip ipif System rx_mode v1_only
Success.
DES-6500:4#
enable rip
Purpose
Used to enable RIP.
Syntax
enable rip
Description
This command is used to enable RIP on the Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To enable RIP:
DES-6500:4#enable rip
Command: enable rip
Success.
DES-6500:4#
disable rip
Purpose
Used to disable RIP.
Syntax
disable rip
Description
This command is used to disable RIP on the Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
288