xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config admin local_enable
Parameters
<password 15>
- After entering this command, the user will be
prompted to enter the old password, then a new password in an
alphanumeric string of no more than 15 characters, and finally
prompted to enter the new password again to confirm. See the
example below.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the password for the “local_enable” authentication method.
DES-6500:4#config admin local_enable
Enter the old password: ******
DES-6500:4#
Command: config admin local_enable
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
175
