xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
1:11 ForceAuth Success Authorized
1:12 ForceAuth Success Authorized
1:13 ForceAuth Success Authorized
1:14 ForceAuth Success Authorized
1:15 ForceAuth Success Authorized
1:16 ForceAuth Success Authorized
1:17 ForceAuth Success Authorized
1:18 ForceAuth Success Authorized
1:19 ForceAuth Success Authorized
1:20 ForceAuth Success Authorized
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
Example usage:
To display the 802.1x auth state for MAC-based 802.1x:
DES-6500:4#show 802.1x auth_state
Command: show 802.1x auth_state
4
7
10
13
Port number : 1:1
Index MAC Address Auth PAE State Backend State Port Status
------ ------------------- ----------------------- --------------------- -----------------
1 00-08-02-4E-DA-FA Authenticated Idle Authorized
2
3
5
6
8
9
11
12
14
15
16
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
config 802.1x auth_mode
Purpose
Used to configure the 802.1x authentication mode on the Switch.
Syntax
config 802.1x auth_mode {port_based | mac_based]
Description
The config 802.1x authentication mode command is used to enable
either the port-based or MAC-based 802.1x authentication feature
on the Switch.
Parameters
[port_based | mac_based ports]
−
The Switch may authenticate
802.1x by either port or MAC address.
Only
administrator-level users can issue this command.
Restrictions
Example usage:
196
