xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show link_aggregation
Purpose
Used to display the current link aggregation configuration on the
Switch.
Syntax
show link_aggregation {group_id <value 1-32> | algorithm}
Description
This command will display the current link aggregation configuration
of the Switch.
Parameters
<value 1-32>
−
Specifies the group ID. The Switch allows up to 32
link aggregation groups to be configured. The group number
identifies each of the groups.
algorithm
−
Specify to view the algorithm employed of this link
aggregation group.
Restrictions None.
Example usage:
To display the current Link Aggregation configuration:
DES-6500:4#show link_aggregation
DES-6500:4
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source-dest
Group ID : 1
Master Port : 2:17
Member Port : 1:5-1:10,2:17
Active Port:
Status : Disabled
Flooding Port : 1:5
131