Specifications
Model
M8610-CM
M8606-CM
Standard Compliance
IEEE 802.3-2005 Ethernet Standard
Management Mode
CLI, Telnet, Web-based
Port Type
One console port for management, one 10/100M MGMT port, one USB port
LED
Status, Primary, Alarm and MGMT port LEDs
Hot Swapping
Supported
Management
Redundancy
Supported
Power Consumption
<30W
EMC Standards
GB9254-2008
Safety Standards
GB4943-2011
Operating
Temperature
0 to 40°C
Storage Temperature
-40 to 70°C
Operating Humidity
10% to 90% RH (non-condensing)
Weight
Net weight: 2.8 kg
Dimensions
(L x W x H)
436 mm x 346 mm x 30 mm
433 mm x 346 mm x 30 mm
The CR2032 lithium battery is used in the M8610/M8606-CM. There is a risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries in a proper way.
M8610/M8606-CM II LITE
The M8610-CM II LITE is the primary management module of the RG-S8610; M8606-CM II LITE is the primary
management module of the RG-S8606.M8610/M8606-CM performs such functions as system switching, system status
control, route management, user access control and management, network maintenance and multi-service card support.
Inserted in slots M1 and M2 in the middle of the chassis, the management module supports active/standby redundancy,
hot backup and hot swapping.
In the system, there must be at least one M8610/M8606-CM II LITE for the system to work properly. However, you
are recommended to configure this module for both slots for higher reliability.
Module Appearance
Figure 1-11 Appearance of the M8610-CM II LITE
Figure 1-12 Appearance of the M8606-CM II LITE
External Interface
The M8610/M8606-CM II LITE module provides three external interfaces:
USB (Universal Serial Bus) interface: By connecting the USB interface, USB storage devices can keep logs, host
version, alarms and other diagnosis information, facilitating online upgrade of switch software and log saving.
To secure data and prevent damage to the device, it is recommended to use qualified USB disk. The USB interface
of the RG-S8600 is compatible with most USB controllers. Some models of USB disk may not be identified. You are
recommended to use Patriot and Start-net Digital USB disks.
Console port: As the serial communications port, it uses the RS-232 interface level and standard the RJ-45
connector. This port is used to connect the serial port of terminal computers running on the background for such
tasks as system debugging, configuration, maintenance, management, and host software loading.
Содержание RG-S8606 B
