D-Link RG-S8606 B, Инструкция по установке и справочник

Страница: 64 / 116

Figure 2-9 Ventilation of RG-S8606 B

Remove all foam packaging materials and protective plastics before you power on
RG-S8614/RG-S8610/RG-S8606/RG-S8606B.
Temperature and Humidity Requirements
To ensure the normal operation and a prolonged use life of the RG-S8614/S8610/S8606/S8606 B, you must maintain an
appropriate temperature and humidity in the equipment room. Too high or low temperature and humidity for a long period
of time may damage the equipment.

In an environment with high relative humidity, the insulating material may have bad insulation or even leak electricity,
and sometimes the materials may suffer from mechanical performance change and metallic parts may get rusted.

On the other hand, in an environment with low relative humidity, the insulating strip may dry and shrink, and static
electricity may occur easily and endanger the circuit on the equipment.

In an environment with high temperature, the device performance greatly degrades and all kinds of hardware faults
happen. And long-term exposure to high temperature expedites the aging process.
Temperature and humidity requirements of the RG-S8614/S8610/S8606
Temperature Relative Humidity
Working condition Non-working condition Working condition Non-working condition
0ºC
–40ºC –40ºC to +70ºC
10%
–90%RH
(non-condensing)
10%
–95%RH
(non-condensing)
Temperature and humidity requirements of the RG-S8606 B
Temperature Relative Humidity
Working condition Non-working condition Working condition Non-working condition
0ºC
–50ºC –40ºC to +70ºC
10%
–90%RH
(non-condensing)
10%
–95%RH
(non-condensing)

Note: The ambient temperature and humidity are measured at the point that is 1.5m above the floor and 0.4m before
the equipment when there is no protective plate in front or back of the equipment rack.