D-Link DWS-3160 Series, Справочное руководство CLI

Страница: 500 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
496
Example
To configure STP:
DWS-3160-24PC:admin# config stp maxage 25
Command: config stp maxage 25
Success.
DWS-3160-24PC:admin#
48-14 config stp ports
Description
This command is used to configure STP parameters for each port, except for Internal Path Cost
and Port Priority.
Format
config stp ports <portlist> {externalCost [auto | <value 1-200000000>] | hellotime <value 1-
2> | migrate [yes | no] | edge [true | false | auto] | p2p [true | false | auto] | state [enable |
disable]| restricted_role [true | false] | restricted_tcn [true | false] | fbpdu [enable | disable]}
Parameters
<portlist> - Enter a list of ports used for the configuration here.
external_cost - (Optional) The path cost between MST regions from the transmitting Bridge to
the CIST Root Bridge. It is only used at CIST level.
auto - Specifies that the external cost value will be set to automatic.
<value 1-200000000> - Enter the external cost value here. This value must be between 1 and
200000000.
hellotime - (Optional) The default value is 2 . This parameter is for MSTP version. For STP and
RSTP version, uses the per system hellotime parameter.
<value 1-2> - Enter the hello time value here. This value must be between 1 and 2.
migrate - (Optional) Operation of management in order to Specifies the port to send MSTP
BPDU for a delay time.
yes - Specifies that the MSTP BPDU for a delay time will be sent.
no - Specifies that the MSTP BPDU for a delay time will not be sent.
edge - (Optional) To decide if this port is connected to a LAN or a Bridged LAN.
true - Specifies that the specified port(s) is edge.
false - Specifies that the specified port(s) is not edge.
auto - In auto mode, the bridge will delay for a period to become edge port if no bridge BPUD
is received. The default is auto mode.
p2p - (Optional) To decide if this port is in Full-Duplex or Half-Duplex mode.
true - Specifies that the port(s) is in Full-Duplex mode.
false - Specifies that the port(s) is in Half-Duplex mode.
auto - Specifies that the port(s) is in Full-Duplex and Half-Duplex mode.
state - (Optional) To decide if this port supports the STP functionality.
enable - Specifies that STP functionality on the port(s) is enabled.
disable - Specifies that STP functionality on the port(s) is disabled.
restricted_role - (Optional) To decide if this port not to be selected as Root Port. The default
value is false.
true - Specifies that the port can be specified as the root port.
false - Specifies that the port cannot be specified as the root port.
restricted_tcn - (Optional) To decide if this port not to propagate topology change. The default
value is false.